Problems with Scenes,Ativate after power of LEDS gives wrong colors

For quite some time I am struggeling with scenes. First tried soe things with snapshots that did not work reliable.
yesterday I creatd two scenes one with all whilte light an one colored scene with amber, red and blue…
They worked OK yesterday, and I was happy to get the ledstip colrollers installed in our bedroom.

Today before placing them in the finall spot I tried again switching on the color scene light setting and it was wrong!!! All lights are RED.
Tried to go to the scenes and ativivate the color scene from there and still light are red.
But when I go to live edit the scene I can see there are still the proper colors in the LIve edit mode.

Also when looked in the YAML it should operate as expected.

id: "1739107516341"
name: slaapkamer sfeermode
entities:
  light.slaapkamer_led_controler_1_bed_hoofdeinde:
    min_color_temp_kelvin: 2000
    max_color_temp_kelvin: 6329
    min_mireds: 158
    max_mireds: 500
    effect_list:
      - blink
      - breathe
      - okay
      - channel_change
      - finish_effect
      - stop_effect
      - colorloop
      - stop_colorloop
    supported_color_modes:
      - color_temp
      - xy
    effect: null
    color_mode: xy
    brightness: 255
    color_temp_kelvin: null
    color_temp: null
    hs_color:
      - 43.937
      - 99.608
    rgb_color:
      - 255
      - 187
      - 1
    xy_color:
      - 0.532
      - 0.442
    friendly_name: slaapkamer_LED_controler_1_bed_hoofdeinde
    supported_features: 44
    state: "on"
  light.slaapkamer_led_controler_2_spiegel:
    min_color_temp_kelvin: 2000
    max_color_temp_kelvin: 6329
    min_mireds: 158
    max_mireds: 500
    effect_list:
      - blink
      - breathe
      - okay
      - channel_change
      - finish_effect
      - stop_effect
      - colorloop
      - stop_colorloop
    supported_color_modes:
      - color_temp
      - xy
    effect: null
    color_mode: xy
    brightness: 255
    color_temp_kelvin: null
    color_temp: null
    hs_color:
      - 0
      - 100
    rgb_color:
      - 255
      - 0
      - 0
    xy_color:
      - 0.701
      - 0.299
    friendly_name: slaapkamer_LED_controler_2_spiegel
    supported_features: 44
    state: "on"
  light.slaapkamer_led_controler_3_bovenspiegel:
    min_color_temp_kelvin: 2000
    max_color_temp_kelvin: 6329
    min_mireds: 158
    max_mireds: 500
    effect_list:
      - blink
      - breathe
      - okay
      - channel_change
      - finish_effect
      - stop_effect
      - colorloop
      - stop_colorloop
    supported_color_modes:
      - color_temp
      - xy
    effect: null
    color_mode: xy
    brightness: 245
    color_temp_kelvin: null
    color_temp: null
    hs_color:
      - 242.588
      - 100
    rgb_color:
      - 11
      - 0
      - 255
    xy_color:
      - 0.136
      - 0.04
    friendly_name: slaapkamer_LED_controler_3_bovenspiegel
    supported_features: 44
    state: "on"
metadata: {}

I tried to restart Z2m, Tried to restart HA nothing changes . everytime it is the same behavior

Because I still have the strips and controlers on my table I switched the ledcontrolers off during the night. and switched the (power) on again today when I discovered this issue.

But What is wrong here? Are scenes that unreliable?

1 post - 1 participant

Read full topic