@RobotGib wrote:
Ok, so I’m not sure where to start with this one. Hopefully someone else has done something similar, and might be able to point me in the right direction.
I have a bunch of exterior accent lights on the outside of my house that use regular E26/E27 bulbs. I replaced those bulbs with Sengled Element Color Plus bulbs. I have the bulbs paired to my HUSBZB-1, and I’m able to control them via Home Assistant just fine. I’ve currently got them set in a alternating static red/green/red/green pattern. So, the first fixture is green, the 2nd fixture is red, etc.
What I’d like to do, is have them switch between red and green (or any other combination, depending on occasion) automatically, based on time…but synchronized.
For example:
Fixtures 1, 3, 5, 7, 9 all start red, Fixtures 2, 4, 6, 8, 10 all start green.
After 1.5 seconds, all fixtures change state together, so the odd numbered lights turn green, and the evens turn red…repeat in a loop until a specific time; at which point all light will turn off for the night.What’s the best way to approach this? Any help is greatly appreciated.
- Gib
Posts: 6
Participants: 3