DHT22 sensor with Sonoff TX

Hello guys

im trying to get the dht22 sensor to work with sonoff tx switch using Esphome but i cant get it to work im getting error

Requesting data from DHT failed!
Invalid readings! Please check your wiring (pull-up resistor, pin number)

here is my configuration

esphome:
  name: living_room_light_switch2
  platform: ESP8266
  board: esp01_1m
    
wifi:
  ssid: "Zain-B715-44D3"
  password: "RYR2BF3HY3B"

  # Enable fallback hotspot (captive portal) in case wifi connection fails
  ap:
    ssid: "Light Switch1 Living Room"
    password: !secret ap_password

captive_portal:

# Enable logging
logger:
  baud_rate: 0
# Enable Home Assistant API
api:

ota:



binary_sensor:
  - platform: gpio
    pin:
      number: GPIO0
      mode: INPUT_PULLUP
      inverted: True
    id: button_1
    on_press:
      then:
        - light.toggle: light_1

  - platform: gpio
    pin:
      number: GPIO9
      mode: INPUT_PULLUP
      inverted: True
    id: button_2
    on_press:
      then:
        - light.toggle: light_2

  - platform: gpio
    pin:
      number: GPIO10
      mode: INPUT_PULLUP
      inverted: True
    id: button_3
    on_press:
      then:
        - light.toggle: light_3

  - platform: status
    name: "T3 Status"

output:
  - platform: gpio
    pin: GPIO12
    id: relay_1

  - platform: gpio
    pin: GPIO5
    id: relay_2

  - platform: gpio
    pin: GPIO4
    id: relay_3

light:
  - platform: binary
    name: "T3 L1"
    id: light_1
    output: relay_1

  - platform: binary
    name: "T3 L2"
    id: light_2
    output: relay_2

  - platform: binary
    name: "T3 L3"
    id: light_3
    output: relay_3

status_led:
  pin:
    number: GPIO13
    inverted: no
    
    
sensor:
  - platform: dht
    model: DHT22
    pin: GPIO1
    
    temperature:
      name: "Living Room Temperature"
    humidity:
      name: "Living Room Humidity"

web_server:
  port: 80

i use RX pin and already disabled logger still not working.

1 post - 1 participant

Read full topic