Preset modes for mqtt based hvac

@chris_ka wrote:

Hi, in 0.96 there was a redesign of the climate integration introducing preset modes.

I connect my zwave based hvac via zwave2mqtt and manual integration based on

In this document there is no mentioning of self defined preset modes.

My configuration looks as follows:

climate:
  - platform: mqtt
    name: "Thermostat Fabian"
    unique_id: "thermostat_fabian"    
    qos: 0
    modes:
      - heat
      - cool
      - 'off'
    mode_state_topic: "zwave2mqtt/23/64/1/0" 
    mode_state_template: >
      {% set values = {'"Off"':'off','"Heat"':'heat', '"Heat Eco"':'cool'} %}
      {{ values[value] if value in values.keys() else 'off' }}
    mode_command_topic: "zwave2mqtt/spirit/23/64/1/0/set"
    current_temperature_topic: "zwave2mqtt/23/49/1/1"
    min_temp: 11
    max_temp: 25
    temp_step: 0.5
    temperature_high_state_topic: "zwave2mqtt/23/67/1/1"
    temperature_high_command_topic: "zwave2mqtt/23/67/1/1/set"    
    temperature_low_state_topic: "zwave2mqtt/23/67/1/11"
    temperature_low_command_topic: "zwave2mqtt/23/67/1/11/set"

I would like to define preset modes “Off”,“Heat”, “Heat Eco”, “Full Power” and assign
temperature_high to “Heat” and “Full Power” and
temperature_low to “Heat Eco”.

can I define the preset modes accourding to the revised climate integration introduced in 0.96. It looks like the documentation is still on the older version
Any help is greatly appreciated

Posts: 1

Participants: 1

Read full topic