Fibaro RGBW does not report state

@Se7enair wrote:

I use a fibaro RGBW (FGRGBWM441 RGBW Controller) with openzwave2mqtt and Aeotec Z-Wave Stick.

But I experience some problems.
The device does not report its state. So I dont see if the device is switched on when I press the manual switch which is connected to the fibaro.

And I also cannot toggle it from HA. I can only dim it to toggle it on and off.

Any Ideas whats the problem?

Posts: 1

Participants: 1

Read full topic