Weather station sensor over rfxtrx, inconsistant swapping temperature

@aukedejong wrote:

Hi all,
Recently I added an RfxCom to my Home Assistant setup. Seams that a neighbor has a Weather Station sending data.
HA auto added a sensor showing data, but the temperature is switching between the actual temp and some fixed number 2674.0

When I use rfxmng on my PC it shows to different data packages.

16-12-2019 06:34:59:013= 0A520E0663010045480359
Packettype    = TEMP_HUM
subtype       = TH14 - Alecto WS3500,WS4500
Sequence nbr  = 6
ID            = 6301 decimal:25345
Temperature   = 6,9 °C
Humidity      = 72
Status        = Wet
Signal level  = 5  -80dBm
Battery       = OK
------------------------------------------------
16-12-2019 06:35:30:192= 10560707630100870004000A031C055459
Packettype    = WIND
subtype       = WIND7 - Alecto WS3500,WS4500
Sequence nbr  = 7
ID            = 6301 decimal:25345
Direction     = 135 degrees  SE
Average speed = 0,4 mtr/sec = 1,44 km/hr = 0,89 mph
Wind gust     = 1 mtr/sec = 3,6 km/hr = 2,24 mph
Signal level  = 5  -80dBm
Battery       = OK

It seams HA combines that two in one sensor.
The HA sensor ID is the same as the TEMP_HUM packettype.

HA shows this:

Wind direction: 135
Wind average speed: 0.2
Wind gust: 0.4
Temperature: 2674
Chill: 827.4
Battery numeric: 9
Rssi numeric: 5
unit_of_measurement: °C
friendly_name: 0a520e0163010045480359 Temperature

OR

Temperature: 6.8
Humidity: 72
Humidity status: wet
Humidity status numeric: 3
Battery numeric: 9
Rssi numeric: 5
unit_of_measurement: °C
friendly_name: 0a520e0163010045480359 Temperature

in one sensor, switching from time to time, with a consistant rhythm.

Somebody any idea how to fix this?

Posts: 1

Participants: 1

Read full topic