@dowhilepaolofast wrote:

esphome:
name: persiane_1
platform: ESP32
board: esp32doit-devkit-v1

wifi:
ssid: “”
password: “”

Enable fallback hotspot (captive portal) in case wifi connection fails

ap:
ssid: “Persiane 1 Fallback Hotspot”
password: “”

captive_portal:

Enable logging

logger:

Enable Home Assistant API

api:

ota:

web_server:
port: 80

switch:
#################

home door

#################

• platform: gpio
  pin:
  number: 26
  inverted: no
  id: a1

• platform: gpio
  pin:
  number: 27
  inverted: no
  id: a2

• platform: template
  name: “pers_on”
  icon: “mdi:gate”
  turn_on_action:

  • switch.turn_on: a1
  • switch.turn_off: a2
  • delay: 6000ms
  • switch.turn_off: a2
  • switch.turn_off: a1

• platform: template
  name: “pers_off”
  icon: “mdi:gate”
  turn_on_action:

  • switch.turn_on: a2
  • switch.turn_off: a1
  • delay: 6000ms
  • switch.turn_off: a2
  • switch.turn_off: a1

i2c:

• id: bus_a
  sda: 14
  scl: 15
  scan: True

sensor:

• platform: ina3221
  address: 0x40
  i2c_id: bus_a
  channel_1:
  shunt_resistance: 0.1 ohm
  current:
  name: “INA3221 Channel 1 Current”
  power:
  name: “INA3221 Channel 1 Power”
  bus_voltage:
  name: “INA3221 Channel 1 Bus Voltage”
  shunt_voltage:
  name: “INA3221 Channel 1 Shunt Voltage”
  channel_2:

  …

  channel_3:

  …

  update_interval: 60s

Hi guys when i declare the ina3221 Platform it gives me error EXPECTED a Dictionary on that line. If i change with the ina219 it works. I have to install some libraries? I m using esphome last version with HAss.io. Thanks.

Posts: 2

Participants: 2

Read full topic