@Iluhis wrote:
I have HA 0.103.4 with MQTT broker 5.1 add-on installed with CC2531 sniffer and spent 2 days trying to make it work.
I`ve tried many instructions and nothing helped.I can publish and see subscribed topics in developer panel, but only if I publish it, but nothing happens when I try to add device (movement detector from Xiaomi)
It worked fine while I was using other system (not HA). Maybe there are some tricks that are not mentioned?
broker config
{ "logins": [], "anonymous": false, "customize": { "active": true, "folder": "mosquitto" }, "certfile": "fullchain.pem", "keyfile": "privkey.pem", "require_certificate": false }
broker log
[22:52:35] INFO: Setup mosquitto configuration [22:52:35] WARNING: SSL not enabled - No valid certs found! [22:52:35] INFO: No local user available [22:52:35] INFO: Initialize Hass.io Add-on services [22:52:35] INFO: Initialize Home Assistant discovery [22:52:35] INFO: Start Mosquitto daemon 1577220755: Loading config file /share/mosquitto/acl.conf 1577220755: mosquitto version 1.6.3 starting 1577220755: Config loaded from /etc/mosquitto.conf. 1577220755: Loading plugin: /usr/share/mosquitto/auth-plug.so 1577220755: |-- *** auth-plug: startup 1577220755: ├── Username/password checking enabled. 1577220755: ├── TLS-PSK checking enabled. 1577220755: └── Extended authentication not enabled. 1577220755: Opening ipv4 listen socket on port 1883. 1577220755: Opening ipv6 listen socket on port 1883. 1577220755: Opening websockets listen socket on port 1884. 1577220755: Warning: Mosquitto should not be run as root/administrator. 1577220765: New connection from 192.168.1.108 on port 1883.
Posts: 2
Participants: 2