@cola007 wrote:
Hi all,
Previously I had three Honeywell TH6320ZW2003 thermostats and all have reported temperature, humidity, and heating/cooling state (i.e. furnace on/heating vs. idle).
I recently added a fourth Honeywell TH6320ZW2003 thermostat to my Z-Wave network after upgrading to 0.103.5 and this latest one does not appear to be displaying humidity or heating/cooling state. It looks like all the entities imported correctly but it’s just not receiving/parsing data. Setting temperature appears to be working fine from HA or from the thermostat as does changing the mode (i.e. heat vs. off)
I’m not sure whether I got a dud thermostat or something with this update caused an issue with the new device. This is the most recent update related to thermostats but, frankly, this code is a bit beyond me and I have no idea whether it would be relevant to this thermostat. https://github.com/home-assistant/home-assistant/pull/29955
Some additional details:
- I have 4 heating zones (boiler) and 1 cooling zone
- 3 out of the 4 thermostats are configured for heat only (this latest one is included in this)
- I tried excluding and re-including the device with no improvement
Has anybody else experienced similar issues or have suggestions for troubleshooting?
Thanks!
Jeff
Posts: 4
Participants: 2