Hello
I have a ESP8622 connected to a pulse out from my energymeter to my heatpump aux. heater. And I cannot get true readings in the integration sensor in HA.
I get a valid reading of 2820W for 3 minutes during a defrost cycle.
This should translate into 2820/60*2/1000=0,094KWh.
Then Reimann integrations sensor messes things up. Here is the setup:
Just the same as the other ones, working fine.
This is what the sensor outputs:
It integrates the 3 minutes of 2820W to a jump from 305 to 312 KWh. instead of showing a 0,094KWh rise.
Seems like the integration functions isn’t able to cope the short bursts of high power?
Any idears?
1 post - 1 participant