@mf_social wrote:
I’m wanting to move my zigbee things to zigbee2mqtt and bought a CC2531 and debugger and panel thing. The light on the debugger would never go to green and working my way through the multitude of Google results didn’t help, and I came to the conclusion that I was suffering from a problem I found in multiple pages where the solder on the pins on the panel thing is overlapping.
No worries, I’m fairly handy with electronics and have a spare nodemcu sat in a box so went down the manual flashing route. Worked my way through it all, flash it, message says ‘uploaded successfully’ but now the stick isn’t recognised when I plug it in.
I’ve tried reflashing it, even deliberately getting it wrong to make sure that it doesn’t say ‘uploaded successfully’ every time, which it doesn’t, so reflashed and still nothing.
I’m thinking it’s probably a dud stick, and I’m just going to bin it and get a pre-flashed one to save any further messing around, but just wanted to see if anyone had any other ideas before I finally throw in the towel?
Any thoughts gratefully received.
Posts: 6
Participants: 4