Leviton DZS15-1LZ switch install issue

@Buzz9075 wrote:

Newbie and having an issue getting going with the Zooz Z wave stick I installed.

The stick appears to have loaded and working OK

Now I added the Leviton DZS15-1LZ switch and on the console I get a switch section and under it leviton DZS15-1LZ switch switch. If I toggle this on the console it will turn the switch on and off. but if I toggle the switch its self nothing happens on this console.

The Zwave log file does show the switch being toggled here it is when I toggled the switch twice(on/off).

2020-01-12 21:03:35.885 Detail, Node005, Received: 0x01, 0x12, 0x00, 0x49, 0x84, 0x05, 0x0c, 0x04, 0x10, 0x03, 0x25, 0x27, 0x2b, 0x2c, 0x72, 0x86, 0x91, 0x77, 0x73, 0x5a
2020-01-12 21:03:35.885 Detail,
2020-01-12 21:03:35.885 Info, Node005, UPDATE_STATE_NODE_INFO_RECEIVED from node 5
2020-01-12 21:03:35.886 Detail, Node005, AdvanceQueries queryPending=0 queryRetries=0 queryStage=Dynamic live=1
2020-01-12 21:03:35.886 Detail, Node005, QueryStage_Dynamic
2020-01-12 21:03:35.886 Detail, Node005, Queuing (Send) SwitchBinaryCmd_Get (Node=5): 0x01, 0x09, 0x00, 0x13, 0x05, 0x02, 0x25, 0x02, 0x25, 0x20, 0xc0
2020-01-12 21:03:35.886 Detail, Node005, Queuing (Query) Query Stage Complete (Dynamic)
2020-01-12 21:03:35.886 Detail,
2020-01-12 21:03:35.886 Info, Node005, Sending (Send) message (Callback ID=0x20, Expected Reply=0x04) - SwitchBinaryCmd_Get (Node=5): 0x01, 0x09, 0x00, 0x13, 0x05, 0x02, 0x25, 0x02, 0x25, 0x20, 0xc0
2020-01-12 21:03:35.893 Detail, Node005, Received: 0x01, 0x04, 0x01, 0x13, 0x01, 0xe8
2020-01-12 21:03:35.894 Detail, Node005, ZW_SEND_DATA delivered to Z-Wave stack
2020-01-12 21:03:35.914 Detail, Node005, Received: 0x01, 0x18, 0x00, 0x13, 0x20, 0x00, 0x00, 0x02, 0x00, 0xb6, 0x7f, 0x7f, 0x7f, 0x7f, 0x01, 0x01, 0x03, 0x00, 0x00, 0x00, 0x00, 0x02, 0x01, 0x00, 0x00, 0x60
2020-01-12 21:03:35.914 Detail, Node005, ZW_SEND_DATA Request with callback ID 0x20 received (expected 0x20)
2020-01-12 21:03:35.914 Info, Node005, Request RTT 28 Average Request RTT 28
2020-01-12 21:03:35.914 Detail, Expected callbackId was received
2020-01-12 21:03:35.928 Detail, Node005, Received: 0x01, 0x0c, 0x00, 0x04, 0x00, 0x05, 0x04, 0x22, 0x01, 0x00, 0x00, 0xb8, 0x00, 0x6d
2020-01-12 21:03:35.928 Detail,
2020-01-12 21:03:35.928 Info, Node005, Response RTT 41 Average Response RTT 41
2020-01-12 21:03:45.273 Detail, Node005, Received: 0x01, 0x12, 0x00, 0x49, 0x84, 0x05, 0x0c, 0x04, 0x10, 0x03, 0x25, 0x27, 0x2b, 0x2c, 0x72, 0x86, 0x91, 0x77, 0x73, 0x5a
2020-01-12 21:03:45.273 Detail,
2020-01-12 21:03:45.273 Info, Node005, UPDATE_STATE_NODE_INFO_RECEIVED from node 5
2020-01-12 21:03:45.273 Detail, Node005, AdvanceQueries queryPending=1 queryRetries=0 queryStage=Dynamic live=1
2020-01-12 21:03:45.885 Error, Node005, ERROR: Dropping command, expected response not received after 1 attempt(s)
2020-01-12 21:03:45.885 Detail, Node005, Removing current message
2020-01-12 21:03:45.886 Detail, Node005, Notification: Notification - TimeOut
2020-01-12 21:03:45.887 Detail, Node005, Query Stage Complete (Dynamic)
2020-01-12 21:03:45.888 Detail, Node005, AdvanceQueries queryPending=0 queryRetries=0 queryStage=Configuration live=1
2020-01-12 21:03:45.888 Detail, Node005, QueryStage_Configuration
2020-01-12 21:03:45.888 Detail, Node005, QueryStage_Complete
2020-01-12 21:03:45.888 Warning, CheckCompletedNodeQueries m_allNodesQueried=1 m_awakeNodesQueried=1
2020-01-12 21:03:45.888 Detail, Node005, Notification: NodeQueriesComplete

The zwave configuration.yaml
zwave:
usb_path: /dev/ttyACM0

Anyone able to help me get the switch talking to the console?

Posts: 1

Participants: 1

Read full topic