@Sleepy wrote:
Hello!
Home Assistant 0.103.6
Earlier I had Broadlink RM4C mini and I thought that the problem is only with the 4 version, but now i bought 3rd version (Broadlink RM3 mini) - everything is the same.I can config it as a switch or send a message through the service, but NOTHING happens. I look at the device through the camera of my mobile phone and see that it is not sending anything (phone can see IR radiation).
If disconnecting the device from the power - then errors that it is impossible to connect. But if you connect, then nothing happens. There are even no error messages. The packet is sent to the Broadlink, but the Broadlink does not send ANYTHING. Please, help!switch:
- platform: broadlink
host: 192.168.1.121
mac: ‘24:DF:A7:7A:6D:EA’
type: ‘rm_mini’
friendly_name: ‘Broadlink RM 3 Mini Bedroom’
switches:
tv_phillips:
friendly_name: “Phillips Tv Power”
command_on: ‘JgAcAB0dHB44HhweGx4cHR06HB0cHhwdHB8bHhwADQUAAAAAAAAAAAAAAAA==’
command_off: ‘JgAaABweOR4bHhwdHB4dHRw6HhsdHR0dOTocAA0FAAAAAAAAAAAAAAAAAAA==’
Posts: 2
Participants: 2