Control Zwave dimmer EVALOGIK ZW39

@jbeale1 wrote:

I’m a HA and Zwave total beginner, running HA 0.103.6 on RPi4. I have one controller: Zooz S2 USB stick, and exactly one device: EVALogik ZW39 Z-Wave Smart Plug (Dimmer). There is one entry for each of those things shown at http://192.168.1.239:8123/config/devices/dashboard

However on http://192.168.1.239:8123/developer-tools/state I see three related entries:
zwave.zooz_zst10_s2_z_wave_plus_usb_stick
zwave.inovelli_unknown_type_c000_id_c002
light.inovelli_unknown_type_c000_id_c002_level

Now when I turn the dimmer on and off with its own hardware button, it works, and I know the Zwave info is transmitted because each state change is logged correctly on the GUI window at http://192.168.1.239:8123/logbook and also shows correctly in the timeline at http://192.168.1.239:8123/history

However my attempts to control this device by creating a new automation at http://192.168.1.239:8123/config/automation
are so far unsuccessful. Under Config/Devices/Device Info/Entities I see there are two different things (“Entities”?) shown, one with a Zwave icon and one with a lightbulb icon. I am wondering if I am trying to control the Zwave part, but what I need is the dimmer (lightbulb) part, with name ending in “…c002_level” (or the other way around?) Does this make any sense?

When I manually trigger my automation attempting to turn on the light, I do see something appear from that moment in time in the “OZW log” at http://192.168.1.239:8123/config/zwave, but with no resulting effect at the actual dimmer. For example, the log result of my automation triggering:

2020-01-14 21:20:25.480 Info, Node005, Value::Set - COMMAND_CLASS_SWITCH_MULTILEVEL - Level - 0 - 1 - 255
2020-01-14 21:20:25.480 Info, Node005, SwitchMultilevel::Set - Setting to level 255
2020-01-14 21:20:25.480 Detail, Node005, Queuing (Send) SwitchMultilevelCmd_Set (Node=5): 0x01, 0x0a, 0x00, 0x13, 0x05, 0x03, 0x26, 0x01, 0xff, 0x25, 0x87, 0x9a
2020-01-14 21:20:25.480 Detail, Node005, Queuing (Send) SwitchMultilevelCmd_Get (Node=5): 0x01, 0x09, 0x00, 0x13, 0x05, 0x02, 0x26, 0x02, 0x25, 0x88, 0x6b

By contrast, this is what the log says after a manual turn on with the hardware button:

2020-01-14 21:27:40.926 Detail, Node005,   Received: 0x01, 0x0b, 0x00, 0x04, 0x10, 0x05, 0x03, 0x20, 0x03, 0x63, 0xde, 0x00, 0x78
2020-01-14 21:27:40.926 Detail,
2020-01-14 21:27:40.926 Info, Node005, Received Basic report from node 5: level=99
2020-01-14 21:27:40.926 Detail, Node005, Queuing (Send) SwitchMultilevelCmd_Get (Node=5): 0x01, 0x09, 0x00, 0x13, 0x05, 0x02, 0x26, 0x02, 0x25, 0x89, 0x6a
2020-01-14 21:27:41.376 Detail, Node005,   Received: 0x01, 0x0d, 0x00, 0x04, 0x10, 0x05, 0x05, 0x26, 0x03, 0x63, 0x63, 0x00, 0xde, 0x00, 0x1d
2020-01-14 21:27:41.376 Detail,
2020-01-14 21:27:41.376 Info, Node005, Received SwitchMultiLevel report: level=99
2020-01-14 21:27:41.376 Detail, Node005, Refreshed Value: old value=0, new value=99, type=byte
2020-01-14 21:27:41.376 Detail, Node005, Changes to this value are not verified
2020-01-14 21:27:41.377 Detail, Node005, Notification: ValueChanged

Here are the two device listing:

light.inovelli_unknown_type_c000_id_c002_level	off	node_id: 5
value_index: 0
value_instance: 1
value_id: 72057594126630913
friendly_name: Garage_Dimmer_1
supported_features: 1

zwave.inovelli_unknown_type_c000_id_c002	ready	node_id: 5
node_name: Inovelli Unknown: type=c000, id=c002
manufacturer_name: Inovelli
product_name: Unknown: type=c000, id=c002
query_stage: Complete
is_awake: true
is_ready: true
is_failed: false
is_info_received: true
max_baud_rate: 40000
is_zwave_plus: true
capabilities: routing,beaming,listening,zwave_plus
neighbors: 1
sentCnt: 20
sentFailed: 0
retries: 0
receivedCnt: 28
receivedDups: 0
receivedUnsolicited: 16
sentTS: 2020-01-14 18:46:48:143 
receivedTS: 2020-01-14 21:27:41:376 
lastRequestRTT: 32
averageRequestRTT: 31
lastResponseRTT: 98
averageResponseRTT: 72
application_version: 2.00
friendly_name: Dimmer1

Posts: 2

Participants: 2

Read full topic