MQTT Discovery climate

@Garfius wrote:

I want to create a climate tru MQTT discovery, but it doen’t trigger, just to heat home. But when i move the web temp, never changes to idle when i move the temp below the readable.

The configuration.yaml that works via template

climate:
  - platform: generic_thermostat
    name: Termostat
    heater: switch.encentre_apagar_4
    target_sensor: sensor.temp_aparell_2

States not working one:
hvac_modes: off,heat
current_temperature: 20
min_temp: 7
max_temp: 35
target_temp_step: 1
temperature: 19
friendly_name: Termostat
supported_features: 1

This is shown on the working one:
hvac_modes: heat,off
current_temperature: 17.6
min_temp: 7
max_temp: 35
temperature: 12.5
hvac_action: idle <-- missing on the other one
friendly_name: Termostat
supported_features: 1

The not working one:

    paquetMqtt = {
      "name":nom,
      "mode_cmd_t":"homeassistant/climate/livingroom/thermostatModeCmd",
      "action_topic":"homeassistant/climate/livingroom/state3",
      "temp_cmd_t":"homeassistant/climate/livingroom/targetTempCmd",
      "temp_stat_t":"homeassistant/climate/livingroom/state1",
      "curr_temp_t":"homeassistant/climate/livingroom/state", 
      "min_temp":7,
      "max_temp":35,
      "temp_step":"0.5",
      "modes":["off", "heat"]
    }

What am i doing wriong?

Posts: 1

Participants: 1

Read full topic