@xion2000 wrote:
I’m in the early ish stages of using Home Assistant and one of the things I would very much like to do would be to extract some of the data from my solar data I collect using a snektek Epever Solar Wifi dashboard (a great piece of equipment for monitoring any epever inverter remotelly), to use within Home Assistant (specifically Battery Voltage) I run a small PC from 12v leisure batteries that I charge through the day from a few solar panels hooked up to the epever inverter. During the winter months there is not enough sunlight (in the UK) to allow me to run totally off grid so I use a 2A car battery charger to maintain the battery level. I would like to extract the battery voltage from the solar dashboard (webpage) and setup a command within Home Assistant to only turn on the battery charger when the battery voltage falls below a certain level.
Posts: 1
Participants: 1