@FaBRiK wrote:
At home I have hot water circulation which circulates the hot water in the pipes to reach hot water immediately. This has to be work only in a given time period. E.g. weekdays from 6AM to 7AM and 6PM to 10PM, weekends from 8AM to 2PM and also 6PM to 10PM. Which makes it more complicated I’d like to run only when anybody is at home. Even the first person arrives after the given switch on time. E.g. in my case the circulation should start az 6PM, but at that time nobody is at home. The first person arrives 7 PM. In this case the circulation should start at 7PM when the first person arrives.
There is a trigger which is my DSC alarm system hooked to Home Assistant, It has different states like “disarmed”, “armed_away”, “armed home”. But in the morning there is no change when the circulation has to start.
So the circuklation has to start if the status of DSC is “disarmed” or “armed_home” and the time period is between the given 6AM-7AM or 6PM-10PM. And also should start if the status changes to “disarmed” within the given time period.
In a nutshell it should work between a time period if we are at home (“armed_away” or “disarmed”), or when we arrive at home (change to “disarmed”) in the given time period.
What is the easiest automation? I was thinking on this so long but no real good solution.
Posts: 2
Participants: 2