Aeotec MotionSensor 6 secure inclusion with Z-Stick Gen7 - RPi4

Hello,

i have a RPi 4 with Aeotec Z-Stick Gen7 running HASSIO

supervisor-2021.10.0
core-2021.10.4

From Aeotec Manual:

Short press 2
times within 1
second

1. Send Security Node Info frame. 2. Add MultiSensor into z-wave network( Security inclusion ):
2. Power on MultiSensor. The MultiSensor’s LED will blink slowly when you short press the Action Button.
3. Let the primary controller into inclusion mode (If you don’t know how to do this, refer to its manual).
4. Press the Action Button.
5. If the inclusion is success, MultiSensor’s LED will be kept turning on for 8 seconds when you short press the
   Action Button. If the LED is still in slow blink, in which you need to repeat the process from step 2.

While its flashing blue its not implemented as secure

Also is it correct, that the Z-Stick Controller is listed as Secure: No

Other Devices such as Abus Siren is able to connect with Security

1 post - 1 participant

Read full topic