Energy meter Orno51x and modbus

@Booster wrote:

Hi,
I change platform from Openhab to Home Assistant, but my problem is to set energy meter orno 51x via modbus in HA,

In OH2 my cfg see like that

serial.home_freq.connection=/dev/ttyUSB0:9600:8:even:1:rtu:150:1000:none:none
serial.home_volt.connection=/dev/ttyUSB0:9600:8:even:1:rtu:150:1000:none:none

poll=5000
serial.home_freq.type=holding
serial.home_freq.id=1
serial.home_freq.start=20
serial.home_freq.length=2
serial.home_freq.valuetype=float32

serial.home_volt.type=holding
serial.home_volt.id=1
serial.home_volt.start=14
serial.home_volt.length=6
serial.home_volt.valuetype=float32

In HA i have only this

modbus:
  type: serial
  name: hub
  methos: rtu
  port: /dev/ttyUSB0
  baudrate: 9600
  stopbits: 1
  bytesize: 8
  parity: N

And error

Invalid config for [modbus]: [methos] is an invalid option for [modbus]. Check: modbus->modbus->0->methos. (See /config/configuration.yaml, line 261).

someone can help me finish the configuration so that I can get the data from the energymeter?

Posts: 5

Participants: 2

Read full topic