Danfoss RXZ-2C Receiver Inclusion (Z-Wave Add Node) failure

@bikefright wrote:

Hello folks,

I have a very specific problem in that I cannot seem to include either of the two new RXZ-2C dual-channel z-wave receivers I have purchased.

Despite some obstacles (with respect to instructions/missing information) getting the RXZ-2C factory reset, which is a pre-cursor to putting it into inclusion mode in the first instance, I am now at a stage where when I try an Add Node in the HA GUI via Z-Wave Network Management, the node_add fails.

Can anyone help me with this?

These are the details surrounding my configuration:

I am running HA 105.5 (supervisor 209) in docker on Ubuntu 18.04.3.

The only addons I run from within HA so-to-speak are:

• Check Home Assistant configuration
• Samba share

I have an Everspring SA413 USB stick (plugged in to a long USB extension lead - not the back of the server tin!) which is reported as a “Z-Wave (Sigma Designs) UZB Z-Wave USB Adapter” in HA.

I do NOT have ModemManager!!! (previosuly removed with an apt-get purge)

I am running open-zwave 1.6 which I have git-pulled into a subdirectory of my config and my configuration.yaml includes the following lines for my z-wave config:

# z-wave component
zwave:
  usb_path: /dev/serial/by-id/usb-0658_0200-if00
  network_key: !secret zwave_network_key
  config_path: /config/openzwave_config

I have 16 x Eurotronic Spirit Z-Wave TRVs, all of which have been tickety-boo for over a year. They have just worked for me. They are all Z-Wave plus devices and are all included “secure”.

I have 4 x Aeotec Z-Wave repeaters dotted about the house to build my mesh.

I have turned on debug logging for homeassistant.components.zwave but get two lines when I try and add (then subsequently remote) the node:

2020-03-07 13:49:25 INFO (SyncWorker_0) [homeassistant.components.zwave] Z-Wave add_node have been initialized
2020-03-07 13:50:11 INFO (SyncWorker_3) [homeassistant.components.zwave] Z-Wave remove_node have been initialized

This is an extract from my OZW_Log.txt:

2020-03-07 13:49:25.293 Info, contrlr, FUNC_ID_ZW_ADD_NODE_TO_NETWORK:
2020-03-07 13:49:25.293 Info, contrlr, ADD_NODE_STATUS_LEARN_READY
2020-03-07 13:49:25.293 Detail, Node001,   Expected callbackId was received
2020-03-07 13:49:25.293 Detail, Node001,   Expected reply was received
2020-03-07 13:49:25.293 Detail, Node001,   Message transaction complete
2020-03-07 13:49:25.293 Detail, 
2020-03-07 13:49:25.293 Detail, contrlr, Removing current message
2020-03-07 13:49:25.293 Detail, Notification: ControllerCommand - Waiting
2020-03-07 13:49:25.294 Info, WriteNextMsg Controller nothing to do
2020-03-07 13:49:32.239 Detail,   Received: 0x01, 0x16, 0x00, 0x4a, 0xdf, 0x02, 0x1d, 0x0f, 0x02, 0x10, 0x00, 0x25, 0x60, 0x91, 0x72, 0x8f, 0x86, 0x43, 0xef, 0x8f, 0x85, 0x8e, 0x84, 0x7d
2020-03-07 13:49:32.239 Detail, 
2020-03-07 13:49:32.239 Info, FUNC_ID_ZW_ADD_NODE_TO_NETWORK:
2020-03-07 13:49:32.239 Info, ADD_NODE_STATUS_NODE_FOUND
2020-03-07 13:49:32.239 Detail, Notification: ControllerCommand - InProgress
2020-03-07 13:49:32.242 Detail,   Received: 0x01, 0x16, 0x00, 0x4a, 0xdf, 0x04, 0x1d, 0x0f, 0x02, 0x10, 0x00, 0x25, 0x60, 0x91, 0x72, 0x8f, 0x86, 0x43, 0xef, 0x8f, 0x85, 0x8e, 0x84, 0x7b
2020-03-07 13:49:32.242 Detail, 
2020-03-07 13:49:32.242 Info, FUNC_ID_ZW_ADD_NODE_TO_NETWORK:
2020-03-07 13:49:32.242 Info, ADD_NODE_STATUS_ADDING_CONTROLLER
2020-03-07 13:49:32.242 Info, Adding controller ID 29
2020-03-07 13:49:32.242 Detail, Notification: ControllerCommand - InProgress
2020-03-07 13:49:54.111 Detail,   Received: 0x01, 0x07, 0x00, 0x4a, 0xdf, 0x07, 0x1d, 0x00, 0x77
2020-03-07 13:49:54.111 Detail, 
2020-03-07 13:49:54.111 Info, FUNC_ID_ZW_ADD_NODE_TO_NETWORK:
2020-03-07 13:49:54.111 Info, ADD_NODE_STATUS_FAILED
2020-03-07 13:49:54.111 Detail, Removing current message
2020-03-07 13:49:54.111 Detail, contrlr, Queuing (Command) Add Node Stop: 0x01, 0x04, 0x00, 0x4a, 0x05, 0xb4
2020-03-07 13:49:54.111 Detail, Notification: ControllerCommand - Failed
2020-03-07 13:49:54.113 Detail, 
2020-03-07 13:49:54.113 Info, contrlr, Sending (Command) message (Callback ID=0x00, Expected Reply=0x4a) - Add Node Stop: 0x01, 0x04, 0x00, 0x4a, 0x05, 0xb4
2020-03-07 13:49:54.166 Detail, contrlr,   Received: 0x01, 0x07, 0x00, 0x4a, 0xdf, 0x06, 0x00, 0x00, 0x6b
2020-03-07 13:49:54.166 Detail, 
2020-03-07 13:49:54.166 Info, contrlr, FUNC_ID_ZW_ADD_NODE_TO_NETWORK:
2020-03-07 13:49:54.166 Detail, Node006,   Expected reply was received
2020-03-07 13:49:54.166 Detail, Node006,   Message transaction complete
2020-03-07 13:49:54.166 Detail, 
2020-03-07 13:49:54.166 Detail, contrlr, Removing current message
2020-03-07 13:49:54.166 Detail, Notification: ControllerCommand - Completed
2020-03-07 13:50:11.696 Detail, Queuing (Controller) Remove Device
2020-03-07 13:50:11.697 Info, Remove Device
2020-03-07 13:50:11.697 Detail, contrlr, Queuing (Command) ControllerCommand_RemoveDevice: 0x01, 0x05, 0x00, 0x4b, 0x81, 0xe0, 0xd0
2020-03-07 13:50:11.697 Detail, Notification: ControllerCommand - Starting
2020-03-07 13:50:11.698 Detail, 
2020-03-07 13:50:11.698 Info, contrlr, Sending (Command) message (Callback ID=0xe0, Expected Reply=0x4b) - ControllerCommand_RemoveDevice: 0x01, 0x05, 0x00, 0x4b, 0x81, 0xe0, 0xd0
2020-03-07 13:50:11.703 Detail, contrlr,   Received: 0x01, 0x07, 0x00, 0x4b, 0xe0, 0x01, 0x00, 0x00, 0x52
2020-03-07 13:50:11.703 Detail, 
2020-03-07 13:50:11.704 Info, FUNC_ID_ZW_REMOVE_NODE_FROM_NETWORK:
2020-03-07 13:50:11.704 Info, REMOVE_NODE_STATUS_LEARN_READY
2020-03-07 13:50:11.704 Detail, Node001,   Expected callbackId was received
2020-03-07 13:50:11.704 Detail, Node001,   Expected reply was received
2020-03-07 13:50:11.704 Detail, Node001,   Message transaction complete
2020-03-07 13:50:11.704 Detail, 
2020-03-07 13:50:11.704 Detail, contrlr, Removing current message
2020-03-07 13:50:11.704 Detail, Notification: ControllerCommand - Waiting
2020-03-07 13:50:11.705 Info, WriteNextMsg Controller nothing to do
2020-03-07 13:50:18.587 Detail,   Received: 0x01, 0x07, 0x00, 0x4b, 0xe0, 0x02, 0x00, 0x00, 0x51
2020-03-07 13:50:18.587 Detail, 
2020-03-07 13:50:18.587 Info, FUNC_ID_ZW_REMOVE_NODE_FROM_NETWORK:
2020-03-07 13:50:18.587 Info, REMOVE_NODE_STATUS_NODE_FOUND
2020-03-07 13:50:18.587 Detail, Notification: ControllerCommand - InProgress
2020-03-07 13:50:18.798 Detail,   Received: 0x01, 0x16, 0x00, 0x4b, 0xe0, 0x04, 0x1d, 0x0f, 0x02, 0x10, 0x00, 0x25, 0x60, 0x91, 0x72, 0x8f, 0x86, 0x43, 0xef, 0x8f, 0x85, 0x8e, 0x84, 0x45
2020-03-07 13:50:18.798 Detail, 
2020-03-07 13:50:18.798 Info, FUNC_ID_ZW_REMOVE_NODE_FROM_NETWORK:
2020-03-07 13:50:18.798 Info, REMOVE_NODE_STATUS_REMOVING_CONTROLLER
2020-03-07 13:50:18.798 Info, Removing controller ID 29
2020-03-07 13:50:18.798 Detail, Notification: ControllerCommand - InProgress
2020-03-07 13:50:18.801 Detail,   Received: 0x01, 0x16, 0x00, 0x4b, 0xe0, 0x06, 0x1d, 0x0f, 0x02, 0x10, 0x00, 0x25, 0x60, 0x91, 0x72, 0x8f, 0x86, 0x43, 0xef, 0x8f, 0x85, 0x8e, 0x84, 0x47
2020-03-07 13:50:18.801 Detail, 
2020-03-07 13:50:18.801 Info, FUNC_ID_ZW_REMOVE_NODE_FROM_NETWORK:
2020-03-07 13:50:18.801 Info, REMOVE_NODE_STATUS_DONE
2020-03-07 13:50:18.801 Detail, Notification: ControllerCommand - Completed
2020-03-07 13:50:18.802 Detail, Node029, Notification: NodeRemoved
2020-03-07 13:50:18.898 Detail,   Received: 0x01, 0x07, 0x00, 0x4b, 0xe0, 0x06, 0x00, 0x00, 0x55
2020-03-07 13:50:18.898 Detail, 

It should be noted that I only press the Add Node button in HA once. I also only press the Remove Node button in HA once.

I can supply my redacted configuration.yaml, full home-assistant.log and full OZW_Log.txt if requested.

TIA,
bikefright

Posts: 2

Participants: 1

Read full topic