MQTT Publish to RF Bridge

@Etienne_Vella wrote:

Hi,

I have a sounder working with 433MHZ and i managed to integrate it with rf bridge flashed with tasmota using button 4. Through the console of the rf bridge if i paste the command cmnd/RF_Bridge/RfKey4 the sounder would be activated.

I’ve configured mosquito to be integrated with Rf Bridge and senors which are using 433mhz are being correctly sent to home assistant.

So far so good.

The issue that i’m having when i try to trigger RfKey 4. This command isn’t being sent to my RF Bridge, and I can confirm it from the console of the RF Bridge. I’m using the following code in the automation section.

action:
  - service: mqtt.publish
    data:
      topic: cmnd/RF_Bridge/RfKey4
      payload: " "

Any Ideas whats the issues. The receiving part form the RF Bridge to Home Assistant is OK the issue is send from Home Assistant to RF Bridge.

Thanks,

Kindest Regards,
Etienne

Posts: 2

Participants: 2

Read full topic