@TheNr1Guest wrote:
Hi all,
I have a shutter that I control via a template switch. When turned on, the switch sets the shutter to a fixed position. Then the switch is turned off, the shutter opens. This works fine, but in the UI the switch behavior could be improved.
When the shutter is fully open and I toggle the switch, the following behavior is observed:
- Switch turns on
- A few seconds pass
- Switch turns off
- Many seconds pass
- Switch turns on
I use the Somfy API to control my shutter and this causes a delay in cover status updates (since it’s not a local API). And that makes the switch behavior noticeable. Is there a way to fix this?
Posts: 2
Participants: 2