Hello, I am testing Home Assistant and currently binding my devices. These include, among others, three Tasmota (v11) sockets. These send their data to a Mosquitto Broker, which runs separately under Ubuntu Server 20.04. In Home Assistant I have integrated this broker with the MQTT extension and also the Tasmota extension. After a supervisor reboot all three Tasmota sockets were recognized. Unfortunately, they are somehow considered together, although I manually sorted them into different areas. If I want to get into the web interface via each detected device, I also arrive at all three devices individually. I.e. the fixed IP numbers are known to Home Assistant. However, if I switch one of the sockets on or off, the other sockets are also switched simultaneously and the consumption values are also all synchronous. My version is 2022.3.7 on a Raspberry Pi 4 as HAOS installation.
1 post - 1 participant