Temperature sensor, smart plug & oven. Not turning on/off with temperature

Hi!

I have installed HA OS in a VM and its working fine. It has found my devices from philips hue, and some others.

I am trying to get a temperature sensor from Philips, to control a smart plug (which has an oven connected to the smart plug).

I am unable to get it to trigger automatically. I have made this automation, just to test the setup.

alias: Ovn Stue Av
description: Slå av ovn i stue over gitt temperatur.
trigger:
  - type: temperature
    platform: device
    device_id: 2941d140e8b5497d05bb51af2c86dc6b
    entity_id: sensor.hue_motion_sensor_2_temperature
    domain: sensor
    above: 22
condition:
  - type: is_temperature
    condition: device
    device_id: 2941d140e8b5497d05bb51af2c86dc6b
    entity_id: sensor.hue_motion_sensor_2_temperature
    domain: sensor
    above: 22
action:
  - type: turn_off
    device_id: 87bbde2ea635327b35a9e36f3182cc48
    entity_id: light.ovn_stue
    domain: light
mode: single

What I do now to test is the following:

1. Turn on the oven in the living room manually.
2. Check manually the temperature from sensor.hue_motion_sensor_2_temperature and its below 22.
3. I am running the automation automatically, and as far as I understand it should NOT turn the oven off because the temperature is below 22. But it turns it off when I run it manually.

I run it manually, because it doesnt seem to do it by itself? What am I missing?

Apprechiate any advice, or pointers to where I can find out how to this simple setup. I have tried watching some youtube videos, and reading the documentation. Someone talks about trying the “Generic Thermostat” addon? but I cant find that anywhere?

1 post - 1 participant

Read full topic