Hi,
I just started using Home Assistant and I’ve ran into a problem which I can seem to fix my self so I would very much like your help!
When I started using Home Assistant it was very stable and had no issue’s but today my ZHA setup failed on some devices (most of the devices are still running and I can switch them on and off without any problems, some sensors are also still working).
I’ve tried to reboot the setup, removing the conbee stick and plugging it again, removing and adding the failing devices, but nothing seems to work.
Error in Core:
2022-04-26 21:38:06 ERROR (MainThread) [frontend.js.latest.202204050] http://192.168.1.13:8123/frontend_latest/b4570d1b.js:91:808 Uncaught TypeError: Cannot read properties of undefined (reading 'entity_id')
System details:
core-2022.4.7
supervisor-2022.04.0
Home Assistant OS 7.6
I have Home Assistant running on a Raspberry Pi 4 with:
- Conbee 2
- Aeotec Z-wave
- P1 monitor (USB)
- Hue
- Conexxoon
- Unify
Zigbee devices:
- 4x Blitzwolf smartplugs (still working)
- 1x Tradfri motion (still works)
- 4x Aqara temp/hum sensor (all failing)
- 2x Aqara wall switch (both failing) - 1x Aqara button (still works)
- 1x Aqara motion (still works)
- 1x Aqara double wall switch (tried to add after the other failed, could pair the device but no data came trough)
The only thing I’ve changed to the system today is adding HACS and the mushroom cards/themes. After doing this everything stil worked like a charm. Hours later issues started so I don’t think this is the cause of the issues.
Help is much appreciated!
1 post - 1 participant