I bought a Paulmann 4-Button Switch Wandschalter Smart Home Zigbee On/Off/Dimm Weiß to control my lights. I paired it with my Conbee2 Stick without any problems. This is the Zigbee Signature I got from the device:
{
“node_descriptor”: “NodeDescriptor(logical_type=<LogicalType.EndDevice: 2>, complex_descriptor_available=0, user_descriptor_available=0, reserved=0, aps_flags=0, frequency_band=<FrequencyBand.Freq2400MHz: 8>, mac_capability_flags=<MACCapabilityFlags.AllocateAddress: 128>, manufacturer_code=4644, maximum_buffer_size=82, maximum_incoming_transfer_size=82, server_mask=11264, maximum_outgoing_transfer_size=82, descriptor_capability_field=<DescriptorCapability.NONE: 0>, *allocate_address=True, *is_alternate_pan_coordinator=False, *is_coordinator=False, *is_end_device=True, *is_full_function_device=False, *is_mains_powered=False, *is_receiver_on_when_idle=False, *is_router=False, *is_security_capable=False)”,
“endpoints”: {
“1”: {
“profile_id”: 260,
“device_type”: “0x0001”,
“in_clusters”: [
“0x0000”,
“0x0001”,
“0x0003”,
“0x0b05”,
“0x1000”
],
“out_clusters”: [
“0x0003”,
“0x0004”,
“0x0005”,
“0x0006”,
“0x0008”,
“0x0019”,
“0x0300”,
“0x1000”
]
},
“2”: {
“profile_id”: 260,
“device_type”: “0x0001”,
“in_clusters”: [
“0x0000”,
“0x0001”,
“0x0003”,
“0x0b05”,
“0x1000”
],
“out_clusters”: [
“0x0003”,
“0x0004”,
“0x0005”,
“0x0006”,
“0x0008”,
“0x0019”,
“0x0300”,
“0x1000”
]
}
},
“manufacturer”: “Paulmann LichtGmbH”,
“model”: “501.34”,
“class”: “zigpy.device.Device”
}
Unfurtunately I didn’t find a blueprint for using this switch and I am not a real expert in Home Assistant - more or less a beginner (with IT background). Is it possible to use this switch in HA? Any ideas how to get it working in HA? I tried several things with other similar blueprints, but for example, I couldn’t dimm a light and the difference between the right and the left side of the switch is not working.
It would be great, if anyone could help me!
1 post - 1 participant