Hello Community,
Maybe someone lost the hair like me on the same issue and can advise how to fix.
After searching in the forum and finding some real good suggestions I still struggle to configure my Livolo Zigbee socket into HA. Reading in the forum I understood the Livolo socket will not be found as a typical devices over the conbee ll gateway as many other device I have already configured. Based on some recommendations I found here it seems I have to use zigbee2mqtt to manage the Livolo device. I managed to get the add on installed together with mosquito. The only point is that my zigbee2mqtt configuration file look very odd. I have just few lines inside plus the lines I configured for the device and the adapter.
I attach below the config and log.
Zigbee2mqtt configuration
enabled: false
master: pty,raw,echo=0,link=/tmp/ttyZ2M,mode=777
slave: tcp-listen:8485,keepalive,nodelay,reuseaddr,keepidle=1,keepintvl=1,keepcnt=5
options: ‘-d -d’
log: false
serial:
port: /dev/ttyACM1
adapter: deconz
Zigbee2mqtt log:
Zigbee2MQTT:info 2022-05-10 20:33:10: Logging to console and directory: ‘/config/zigbee2mqtt/log/2022-05-10.20-33-07’ filename: log.txt
Zigbee2MQTT:info 2022-05-10 20:33:10: Starting Zigbee2MQTT version 1.25.1 (commit #unknown)
Zigbee2MQTT:info 2022-05-10 20:33:10: Starting zigbee-herdsman (0.14.27)
Zigbee2MQTT:error 2022-05-10 20:33:10: Error while starting zigbee-herdsman
Zigbee2MQTT:error 2022-05-10 20:33:10: Failed to start zigbee
Zigbee2MQTT:error 2022-05-10 20:33:10: Check Zigbee2MQTT fails to start | Zigbee2MQTT for possible solutions
Zigbee2MQTT:error 2022-05-10 20:33:10: Exiting…
Zigbee2MQTT:error 2022-05-10 20:33:10: Error: spawn udevadm ENOENT
at Process.ChildProcess._handle.onexit (internal/child_process.js:274:19)
at onErrorNT (internal/child_process.js:469:16)
at processTicksAndRejections (internal/process/task_queues.js:82:21)
[20:33:12] INFO: Handing over control to Zigbee2mqtt Core …
1 post - 1 participant