@doucga wrote:

Hi Group

I have an issue getting Insteon up and running in Home Assistant.

Installed an image for Home Assistant on a Raspberry Pi 4 Model B 64 bit.

I have a 2413U USB PLM. After connecting the PLM the dmesg gives me:

usb 1-1.4: FTDI USB Serial Device converter now attached to ttyUSB0

My configuration.yaml has:

PLM configuration variables

insteon:
port: ttyUSB0

When I restart the Pi, Home Assistant gets stuck on:

WARNING (MainThread) [insteonplm] Connection failed, retry in 11 seconds: ttyUSB0
etc.

I’ve followed the instructions in the Documentation without success.

Any advice or suggestions on how to get this working?

Thanks!

Garry

Posts: 1

Participants: 1

Read full topic