Unable to open Samba Hassio after installing new routerfirmware

@Canedje wrote:

Today I switched my netgear firmware to dd-rwt.
on my Netgear r8000
In de basics it worked out fine.
I’m only not possible to open HA anymore by Samba in the explorer.
The network device is vissible: but gives an access error.:

Knipsel775×188 26.8 KB

I did restart and reinstall Samba, no effect.
If I look in the Samba log I do see attemps for logging in:

Copyright Andrew Tridgell and the Samba Team 1992-2019
Registered MSG_REQ_POOL_USAGE
Registered MSG_REQ_DMALLOC_MARK and LOG_CHANGED
Processing section "[config]"
Processing section "[addons]"
Processing section "[ssl]"
Processing section "[share]"
Processing section "[backup]"
added interface eth0 ip=192.168.2.78 bcast=192.168.2.255 netmask=255.255.255.0
INFO: Profiling support unavailable in this build.
No builtin backend found, trying to load plugin
tdb(/var/lib/samba/registry.tdb): tdb_open_ex: could not open file /var/lib/samba/registry.tdb: No such file or directory
daemon_ready: daemon 'smbd' finished starting up and ready to serve connections
waiting for connections
netbios connect: name1=HASSIO         0x20 name2=PC-EDWARDW8    0x0
netbios connect: local=hassio remote=pc-edwardw8, name type = 0
netbios connect: name1=HASSIO         0x20 name2=PC-EDWARDW8    0x0
netbios connect: local=hassio remote=pc-edwardw8, name type = 0
netbios connect: name1=HASSIO         0x20 name2=PC-EDWARDW8    0x0
netbios connect: local=hassio remote=pc-edwardw8, name type = 0
Could not find child 72 -- ignoring
netbios connect: name1=HASSIO         0x20 name2=PC-EDWARDW8    0x0
netbios connect: local=hassio remote=pc-edwardw8, name type = 0

I do have the feeling it is something to do with login credentials.
But I get no loggin prompt.
Any ideas?

Posts: 2

Participants: 2

Read full topic