@LRRuk wrote:
After some advice from knowledgeable people.
Background;
I’ve gone from Hue bridge and 3 of Xiaomi Hubs to a Zigbee2mqtt setup with a cc2531 and 4 of cc2530+cc2591 routers however these kept dropping nodes… So I went back to the Hue + Xiaomi setup.
This was working great until recently when the Hue bridge kept dropping lights, so I took the plunge and got a ‘Conbee II’ stick with a Raspberry Pi 4B which after a number of teething problems is now rock solid for the majority of my set up.
Problem
I need to improve far reaches of the house and thought I’d re-use the four cc2530+cc2591 routers. Flashing the latest ‘Koenkk/Z-Stack-firmware’ doesn’t seem to be too reliable, so I’ve been looking around (a lot being on lockdown) and come across ‘ptvo.info’ who has released a number of sets of firmware for the cc2530 including a release in the last few days.
Question
Does anyone have any experience with or know of any problems working with this firmware between HA and DeCONZ? On initial setup it appears to work better and as a plus point had the option to configure a status LED which put an end to starring at a beige box thinking “Is it on? Is it working?”.
Grateful for your time and knowledge.
Posts: 1
Participants: 1