@redflag237 wrote:
Good Morning,
I’ve got a question regarding Tasmota (Option 19 Autodiscovery: On) and Autodiscovery with Home Assistant. My Tasmota is latest Release 8.2.0 from March. Home-Assistant is 0.108.3. The Device is a ESP-01 with Binary Switch (ON/OFF) on GPIO0, configured as “Switch 1(9)”. There is another Temperature Sensor, DS18b20, on GPIO2.On Home-Assistant side MQTT Connection is configured and running. There are several other Sensors configured on fixed topics. Autodiscovery is enabled. Enabling Autodiscovery Option 19 on Tasmota immadiately shows the device in lovelace. There are two Bullets showing up: In one hand there is the Status Button, that contains RSSI, Built, IP-Address, etc. In other hand there is the Temperature Sensor DS18b20, that shows current temp in lovelace. But the binary switch is not showing up, whatever i try to get it running.
Watching the Console on Tasmota i can see the Pin changes and sending it to telemetry topic. Can anyone help me on that?
Best,
redflag237
Posts: 1
Participants: 1