I have bought a few Danfoss Ally and external temperature sensors for each room. I have successfully setup node-red to update the external-temperature on the Danfoss thermostats every 5 min.
It seems like that the Danfoss correctly sets the valve according to the external temperature sensor and not the internal one. The internal sensor always reads about 2-5 degrees warmer than the external.
My problem is, that in Lovelace and in HomeKit the current temperature is from the internal sensor, not the external one.
Is there anyway, to make HomeKit and Lovelace use the external sensor as the current temperature?
1 post - 1 participant