@FlangeMonkey wrote:
Hi Guys,
I have a TBKHome TZ88 and its been working for if not years on smartthings. I am migrating over to HA and am using a ZMEEUZB1 (which was on firmware 5.5). I have 2 other devices connected any they work fine.
I have included the TZ88 and it workings without issues, however when I move the device and therefore power it off and back on, it fails to communicate on the z wave network and the logs show its a presumed dead.
Any thoughts? I’ve tried a bunch of stuff including the painful manual update of the ZMEEUZB1. I cannot seem to find firmware for the TZ88 (which I think could be the problem).
2020-04-16 02:27:07.658 Detail, Node014, ZW_SEND_DATA Request with callback ID 0x3f received (expected 0x3f) 2020-04-16 02:27:07.658 Info, Node014, WARNING: ZW_SEND_DATA failed. No ACK received - device may be asleep. 2020-04-16 02:27:07.658 Warning, Node014, WARNING: Device is not a sleeping node. 2020-04-16 02:27:07.658 Error, Node014, ERROR: node presumed dead 2020-04-16 02:27:07.658 Detail, Node001, Expected callbackId was received 2020-04-16 02:27:07.658 Detail, Node001, Expected reply was received 2020-04-16 02:27:07.658 Detail, Node001, Message transaction complete 2020-04-16 02:27:07.658 Detail, 2020-04-16 02:27:07.658 Detail, Node014, Removing current message 2020-04-16 02:27:07.658 Detail, Node014, Notification: Notification - Node Dead 2020-04-16 02:27:07.659 Error, Node014, ERROR: Dropping command because node is presumed dead 2020-04-16 02:27:07.659 Detail, Node014, Removing current message 2020-04-16 02:27:07.659 Error, Node014, ERROR: Dropping command because node is presumed dead 2020-04-16 02:27:07.659 Detail, Node014, Removing current message
Posts: 1
Participants: 1