Quantcast
Channel: Configuration - Home Assistant Community
Viewing all articles
Browse latest Browse all 105869

Strange IP address

$
0
0

@rajan wrote:

I run HA Core 0.108.8 on Raspi Model 4 64bits and have given Raspi a static IP address from my router.
When checking with Terminal&SSH I found some IP:s that dont belong to my subnet (192.168.1.0/24).
They are 172.30.xx.xx … check below … where do they come from and should I be concerned?

$ ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
16: eth0@if17: <BROADCAST,MULTICAST,UP,LOWER_UP,M-DOWN> mtu 1500 qdisc noqueue state UP 
    link/ether 02:42:ac:1e:21:00 brd ff:ff:ff:ff:ff:ff
    inet 172.30.33.0/23 brd 172.30.33.255 scope global eth0
    valid_lft forever preferred_lft forever
    
    
$ cat /etc/hosts
127.0.0.1       localhost
::1     localhost ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
172.30.32.2     hassio
172.30.32.2     supervisor
172.30.33.0     core-ssh.local.hass.io core-ssh

Posts: 3

Participants: 2

Read full topic


Viewing all articles
Browse latest Browse all 105869

Trending Articles



<script src="https://jsc.adskeeper.com/r/s/rssing.com.1596347.js" async> </script>