Aeotech 5 gen on rpi 4

@Keglekongen wrote:

Hello
Sorry if this is a basic question. I am not to good at linux and command codes etc. so maybe I cant see a basic solution.

But I have HA os on a raspberry pi, and it worked perfectly with HA. So I tried to add my Aeotech 5 gen stick so I could integrate the Aeotech sensor. But I cant get the raspberry pi 4 to accept the Aeotech stick.

I tried to google-fu solution and found this:

But I cant get it to work still. I even have a USB 3.0 extern powered hub that was confirmed to work by a user on the threat above.

I tried to use the intregration function adding the code: /dev/ttyACM0 but always got an error. I tried to hub on the usb 2 and 3 on the rpi4 and also rebooting after every switch.

I also tried to add the code, that are explained in the offical guide:

(https://www.home-assistant.io/docs/z-wave/installation/)

zwave:
usb_path: /dev/ttyACM0
device_config: !include zwave_device_config.yaml

Sadly now I have to reinstall it since it wont start up now, after trying to messing with the config.yaml.

Does everything have a solution for this problem?

my hardwarte build is:
Raspberry pi 4, with offical power supply

3.0 usb hub:

power supply for the USB hub, 5V 2A.

Aeotech 5 gen stick

Posts: 3

Participants: 2

Read full topic