@thejoefletch wrote:
I have a Feit Electric A19 800lm RGBCCT Bulb flashed with Tasmota installed and synced up to Home Assistant. When I try to turn it on from Home Assistant, the bulb will physically turn on but the Home Assistant status is not reflected properly; toggle flicks to on and then within a second goes to back off but the bulb stays on. In the Tasmota console, I can see the request from Home Assistant to turn the light on and Tasmota shows on.
Not sure what the issue is here or exactly how to troubleshoot it.
- Could it be that I have possible WiFi connection issues? (I’m doubtful that this is the issue since I can see the request from Home Assistant in the Tasmota console.)
- Is there something wrong with my configuration below?
- Is the light bulb not reporting it’s status after making the call?
I got my configuration template from here.
light: - platform: mqtt name: "Front Door Light" command_topic: "cmnd/Front_Door_Light/POWER" state_topic: "tele/Front_Door_Light/STATE" state_value_template: "{{value_json.POWER}}" availability_topic: "tele/Front_Door_Light/LWT" brightness_command_topic: "cmnd/Front_Door_Light/Dimmer" brightness_state_topic: "tele/Front_Door_Light/STATE" brightness_scale: 100 on_command_type: "last" brightness_value_template: "{{value_json.Dimmer}}" white_value_state_topic: "tele/Front_Door_Light/STATE" white_value_command_topic: "cmnd/Front_Door_Light/white" white_value_scale: 100 white_value_template: "{{ value_json.Channel[3] }}" rgb_command_topic: "cmnd/Front_Door_Light/Color2" rgb_state_topic: "tele/Front_Door_Light/STATE" rgb_value_template: "{{value_json.Color.split(',')[0:3]|join(',')}}" effect_command_topic: "cmnd/Front_Door_Light/Scheme" effect_state_topic: "tele/Front_Door_Light/STATE" effect_value_template: "{{value_json.Scheme}}" effect_list: - 0 - 1 - 2 - 3 - 4 payload_on: "ON" payload_off: "OFF" payload_available: "Online" payload_not_available: "Offline" qos: 1 retain: false
Posts: 1
Participants: 1