@emimart wrote:
Hi!
First of all sorry for my bad English
I opened the same topic a few days ago, but I realized I choosed wrong title and I explained my problem in a pretty incomprehensible way. So here I am, again.Someone can help me? I have a “strange” problem with HA, Zigbee2MQTT, IKEA Tradfri bulb and Tradfri remote.
I configured all following the instruction on zigbee2mqtt.io
I have a chandelier with 5 bulbs, type GU10. Note: I bought one box with 3 bulbs and 1 remote and 2 bosx with only a bulb. Same model. I’ll write “bulbs 1-2” for the bulb in the single box and “3-5 bulbs” for the items in the bundle with remote.
First time: using HA panel I could control all the bulb in one time. On/Off, color temperature and brightness, using remote I can switch the bulbs On/Off and dimmer the light BUT
- click on the switch to change color temperature -> “3-5” change the color temperature
- click again on the switch (doesn’t matter if I try to low or rise color temperature) and:
a) “1-2” bulbs switch following che first command (described in point 1)
AND
b) “3-5” bulbs change (again) following the second input.
I tried to dimmer the light before use color temperature command and a lot of other conmbination. No effetct. “1-2” bulbs was always a step back “3-5” bulbs when talking about color temperature.So I reset all the bulbs. New (same) configuration. Now “1-2” bulbs ignore all the temperature color from the remote. Only from the remote.
I tried to read the debug log, noticed something strange but can’t realize what’s wrong.Please help me, I’m going mad.
Posts: 1
Participants: 1