ZAH with a CC2531 stick

@horchi wrote:

Hello,

have problems getting the CC2531 working (I’m running HA 0.110.0 with python 3.8.0).

Connecting the stick:
May 22 07:03:12 gate kernel: [2216338.817442] usb 3-3: new full-speed USB device number 3 using xhci_hcd
May 22 07:03:13 gate kernel: [2216338.969350] usb 3-3: New USB device found, idVendor=0451, idProduct=16a8
May 22 07:03:13 gate kernel: [2216338.969353] usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
May 22 07:03:13 gate kernel: [2216338.969355] usb 3-3: Product: TI CC2531 USB CDC
May 22 07:03:13 gate kernel: [2216338.969357] usb 3-3: Manufacturer: Texas Instruments
May 22 07:03:13 gate kernel: [2216338.969358] usb 3-3: SerialNumber: __0X00124B0014D9E18D
May 22 07:03:13 gate kernel: [2216338.970162] cdc_acm 3-3:1.0: ttyACM0: USB ACM device
May 22 07:03:13 gate snapd[2438]: hotplug.go:199: hotplug device add event ignored, enable experimental.hotplug
It is detected at ttyACM0.
Vow I move to ‘Iterations’ selecting ZAH and the stick:

grafik833×472 38.6 KB

no it takes 2 minutes than I see:

grafik803×388 27.3 KB

I selecting the option containing CC2531, than I select ‘hardware’ and didn’t change the 11520 (don’t know what it is):

Clicking send this appear:

Did you have an idea what I missing?