Utility Meter Correct Configuration

@samy wrote:

I want to track how much m3 of gas I consume on heating. I have my heating system connected to a switch, and I have set up a generic thermostat. When heating it consumes 1 m3 per hour.

I set up a utility meter to track consumption but I don’t think is behaving the way I intended. It just adds 1 m3 every time it goes from idle to heating, instead of tracking minutes heating. I made a sensor that returns 1 when the switch is on, and 0 when off, and a utility meter to read that sensor.

Did I get something wrong?

This is my configuration:

utility_meter:
  consumo_gas_dia:
    source: sensor.calefaccion_central_calentando
    cycle: daily
  consumo_gas_mes:
    source: sensor.calefaccion_central_calentando
    cycle: monthly

sensor:
  - platform: template
    sensors:
      calefaccion_central_calentando:
        friendly_name: Calentando
        unit_of_measurement: 'm3'
        value_template: "{% if states('switch.0x00158d000427fce2_switch_l1') =='on' %}1{% else %}0{% endif %}"

Posts: 2

Participants: 2

Read full topic