@nightmare1 wrote:
I am trying to switch 2 relays using a node mcu esp-12E board
however i can get the tasmota UI working but when i use HA i am getting strange behaviour.
the toggle buttons on HA will toggle the tasmota once but not the other way and the button in HA will flick back a seond later, its as if the device is not sending its state back to HA, i have tried various state_topic instructions but i a think some of this cant be adjusted in the .yaml so im a bit lost.
I will note that it possibly worked for a moment when i changed freindly names or topic name.
(The relay will eventually be in interlocking mode but this seems to work in tamota ok
i am also using a temp sensor on GPIO4
the relays are GPIO12 and GPIO14, i assum it should still work with nothing attached to the pins as i ahve tried it with and without and the Tasmota to relay part seems to work fine.)
thanks in advance for your help.
Posts: 1
Participants: 1