Hello.
I have connected a lamp to a fixed value dimmer and voltage via KNX actuators.
If, for example, channel 1 is switched on and channel 2 is off, then the lamp is dimmed.
If channel 1 is off and channel 2 is on, then the lamp is bright.
If both channels are switched off, the lamp is off.
Both channels should not be switched on at the same time.
The channels can be accessed individually via KNX integration.
Now I need an entity that switches the individual channels in both directions.
So something like a drop-down list with the entries “off”, “dimmed” and “on”.
In addition, the entity should be changed accordingly if the KNX channels change accordingly.
What is the best way to implement something like this?
Greetings
1 post - 1 participant