Hi guys,
I want to use AHC Blueprint and can’t get the calibration working.
I set up my thermostat and the room temperatur sensor as well as the window contacts. I am using an Aqara E1 Thermostat via ZHA.
The automation for opening window and turning off the thermostat works fine.
In the calibration tab of the blueprint I set the timeout to 5 seconds (just to see if its working) and the calibration delta to 1°C.
My temperature sensor says its 21,5°C and the thermostat says its 24°C (due to the curtain hanging before the thermostat).
The thermostat is set to 23°C and not heating because the calibration is not working with the room temperature sensor.
I think my mistake is the calibration entity key word. I have no idea what to put there.
Can you please help me?
Thanks in advance and Greetings
1 post - 1 participant