@turtleboy133 wrote:
A while back I had a Home Assistant server on a Raspberry Pi 2 that I created myself using the old virtualenv approach. I was able to get the Z-wave configuration set up so that I could control the WD500Z-1 wall dimmer switch via Home Assistant (it would show a toggle on the main screen). However, I didn’t have much time to play around with Home Assistant so I shelved the project for a few years. This week I sat down to take another look and decided to upgrade to the hassbian Raspberry Pi 2 image. That went extremely smoothly. However, I’m a bit confused about where to go to from here. The Z-wave configuration automatically found my two Z-wave devices (the WD500Z-1 wall dimmer switch and the YRD216 lock). However, I don’t seem to be able to do anything with these devices. For example, If I try to set up an automation for a light, I get an error that there’s no available light entity. Likewise, for the lock there are only three entities (sensor alarm level, alarm type and battery level). There’s no ability to lock/unlock.
Posts: 3
Participants: 1