Hi,
I flashed the Dongle with the OpenThread Firmware via “Silabs Firmware Flasher | Web based flasher for ZB-GW04 and ZBDongle-E. MultiPAN RCP firmware enables these devices to be used with Silabs Multiprotocol Addon in Home Assistant. Allow Zigbee and Thread to co-exist on the same dongle. Get ahead of the tech an experiment with Matter!”. Then I plugged in the dongle to my HA server. Then I thought HA will see the Thread dongle and suggest me the Thread service. Not happened. Then I installed the “OpenThread Border Router” addon and selected my dongle in the settings. But then I always get an error and the addon is restarting:
[15:50:20] INFO: The otbr-web is disabled.
s6-rc: info: service mdns: starting
s6-rc: info: service s6rc-oneshot-runner: starting
s6-rc: info: service mdns successfully started
s6-rc: info: service s6rc-oneshot-runner successfully started
s6-rc: info: service fix-attrs: starting
s6-rc: info: service banner: starting
s6-rc: info: service fix-attrs successfully started
s6-rc: info: service legacy-cont-init: starting
s6-rc: info: service legacy-cont-init successfully started
[15:50:20] INFO: Starting mDNS Responder...
Default: mDNSResponder (Engineering Build) (Jan 14 2025 21:04:03) starting
-----------------------------------------------------------
Add-on: OpenThread Border Router
OpenThread Border Router add-on
-----------------------------------------------------------
Add-on version: 2.13.0
You are running the latest version of this add-on.
System: Home Assistant OS 14.1 (amd64 / qemux86-64)
Home Assistant Core: 2025.1.2
Home Assistant Supervisor: 2024.12.3
-----------------------------------------------------------
Please, share the above information when looking for help
or support in, e.g., GitHub, forums or the Discord chat.
-----------------------------------------------------------
s6-rc: info: service banner successfully started
s6-rc: info: service universal-silabs-flasher: starting
[15:50:20] INFO: Flashing firmware is disabled
s6-rc: info: service universal-silabs-flasher successfully started
s6-rc: info: service otbr-agent: starting
[15:50:21] INFO: Setup OTBR firewall...
[15:50:21] INFO: Starting otbr-agent...
[NOTE]-AGENT---: Running 0.3.0-b067e5ac-dirty
[NOTE]-AGENT---: Thread version: 1.3.0
[NOTE]-AGENT---: Thread interface: wpan0
[NOTE]-AGENT---: Radio URL: spinel+hdlc+uart:///dev/ttyUSB1?uart-baudrate=460800&uart-flow-control
[NOTE]-AGENT---: Radio URL: trel://enp0s3
[NOTE]-ILS-----: Infra link selected: enp0s3
49d.17:08:40.888 [W] P-SpinelDrive-: Wait for response timeout
49d.17:08:42.890 [W] P-SpinelDrive-: Wait for response timeout
49d.17:08:44.893 [W] P-SpinelDrive-: Wait for response timeout
49d.17:08:44.893 [C] Platform------: Init() at spinel_driver.cpp:83: Failure
49d.17:08:46.895 [W] P-SpinelDrive-: Wait for response timeout
[15:50:59] WARNING: otbr-agent exited with code 1 (by signal 0).
Chain OTBR_FORWARD_INGRESS (0 references)
target prot opt source destination
DROP all -- anywhere anywhere PKTTYPE = unicast
DROP all -- anywhere anywhere match-set otbr-ingress-deny-src src
ACCEPT all -- anywhere anywhere match-set otbr-ingress-allow-dst dst
DROP all -- anywhere anywhere PKTTYPE = unicast
ACCEPT all -- anywhere anywhere
otbr-ingress-deny-src
otbr-ingress-deny-src-swap
otbr-ingress-allow-dst
otbr-ingress-allow-dst-swap
Chain OTBR_FORWARD_EGRESS (0 references)
target prot opt source destination
ACCEPT all -- anywhere anywhere
[15:50:59] INFO: OTBR firewall teardown completed.
s6-svlisten1: fatal: /run/s6-rc/servicedirs/otbr-agent failed permanently or its supervisor died
s6-rc: warning: unable to start service otbr-agent: command exited 1
s6-rc: info: service legacy-cont-init: stopping
/run/s6/basedir/scripts/rc.init: warning: s6-rc failed to properly bring all the services up! Check your logs (in /run/uncaught-logs/current if you have in-container logging) for more information.
/run/s6/basedir/scripts/rc.init: fatal: stopping the container.
s6-rc: info: service universal-silabs-flasher: stopping
s6-rc: info: service mdns: stopping
Default: mDNSResponder (Engineering Build) (Jan 14 2025 21:04:03) stopping
s6-rc: info: service universal-silabs-flasher successfully stopped
s6-rc: info: service banner: stopping
s6-rc: info: service banner successfully stopped
s6-rc: info: service legacy-cont-init successfully stopped
s6-rc: info: service fix-attrs: stopping
s6-rc: info: service fix-attrs successfully stopped
s6-rc: info: service s6rc-oneshot-runner: stopping
s6-rc: info: service s6rc-oneshot-runner successfully stopped
[15:50:59] INFO: mDNS ended with exit code 4 (signal 0)...
s6-rc: info: service mdns successfully stopped
1 post - 1 participant