Clik here to view.
Smart plugs utility meter daily/monthly/yearly unexpected results
Hi all, i’ve got multiple zigbee 3.0 smart plugs with energy consumption (current usage & total usage). I’ve added the configuration to get a daily/monthly/yearly sensor for the total usage but i...
View ArticleEnergy tab - Gas
I have a smart meter that reports total gas Kwh via MQTT into HA This normally works fine, with the energy tab showing the delta in Kwh for every hour. However, on occasion the first hour of the day...
View ArticleClik here to view.
Setup Starlink MQTT
Using the MQTT tool from the link below, I can publish status information from my Starlink receiver and listen to it in Mosquitto broker (see image). Need help with next steps to make this information...
View ArticleWindow Sensor with Radiator Valve
Hi Sorry for my bad english. I am very new with samrt home systems. I use HamaThermostats and a sonoff windo sensor. This ist my config to put the Thermostat off. But I think that doenst work. id:...
View ArticleRiemann Sum state unknown and status paused
Hi All, I’ve a bunch of tuya plugs with energy monitor and them works fine. I’m not able to create a Riemann sum and related utility meter. My configuration is: - platform: integration source:...
View ArticleTransfer Bosch alarm to siren. how to interrupt
Hi there, I have a Bosch alarm system, this is also integrated into HA. Now I would like another siren to be activated in the event of an alarm. I also achieved this with the following automation:...
View ArticleHVAC mode changed as trigger
Hello, im new in Home Assistant, i switched over from Homekit + Homebridge. I have some Eurotronic Spirit Zigbee thermostats at my radiators and a wired tado Thermostat to switch my gas boiler on and...
View ArticleRaspberry PI S0 Counter again
My Rapsberry is installed in my Electrical Cabinet. I also managed to read pulses from my Eltako DSZ15D Power Meter from S0 bus via Python Script directly connected to GPIO24. /100 Pulses per kWh...
View ArticleSmart Things - Virtual Switch - HA alternative
Hi Guys. I am coming over to HA from SmartThings and i am still gettting my head around things. If i can give you an example of what i have in ST and hope someone can advise on how HA will work. I use...
View ArticleCalculation 2bytefloat type sensor value
Hello, I am new pretty new in the advanced configuration of home assistant and I am stuck for the moment. Most of my devices are (or will be) connected at KNX. I am currently integrating my building...
View ArticleClik here to view.
Light "turned on" - no reason
Hi Guys! I have aqara motion sensor (modded to 5 seconds), conbee with Deconz on docker and group of Ikea bulbs. In the past it was working fine with NodeRED, but I decided to move automation to HA. I...
View ArticleUsing value_template in with MQTT help
I have a temperature probe sensor that works great using MQTT. However, when my probe is not connected, I would like the state value to default to “0” rather than “unknown”. I have read the...
View ArticleESPhome with no HA blinks
Hello dear friends, I have a question because I have not been able to find the answer myself: I have several ESPhome based light sources in my apartment that work perfectly well, but every time I turn...
View ArticleClik here to view.
Update for media_player.tv fails (samsungtv_tizen custom component)
Sorry for posting here but I’ve also opened an issue for the creator, but he seems none responsive. Last time he replied was 5 Jul 2021 GitHub GitHub - jaruba/ha-samsungtv-tizen: 📺 HomeAssistant - For...
View ArticleClik here to view.
Detect rapid relative rise of a sensor
Hi, I installed a temperature sensor in my bathroom waste water vent. I would like to use this sensor to detect whether someone is taking a shower. You can see the process well in the picture below....
View ArticleGrafana 401: unauthorized error, on iphone only
To start with, I’m not sure I have port forwarding set up right, as I dont really understand how to do it, and im very new to Home Assistant. But I’ve got it up and running via duckdns.org, and I have...
View ArticleModbus write_register function code 16 for single value
Hi all, I am writing a modbus integration for the Itho HRU 400. I have been able to read all the reading registers as sensors in home assistant and use them in a dashboard. Now I want to be able to...
View ArticleLost attribute daylight in version 2021.12.10
HI, After I updated to version 2021.12.10 i lost the attribute ‘daylight’ in my HUE outdoor motion sensor. This attribute has the condition ‘true’ when the lux value goes over a thresshold and ‘false’...
View ArticleHow to rename workday sensor state
I am using the workday sensor and it’s states are: On/Off. I’d like to rename the state to Yes and No (instead of On / Off). I’ve tried using this template sensor with no results (still getting...
View ArticleWhat is the syntax for using a MAC address in device_tracker
What is the correct syntax in the line below to replace “richardUlefone” to the MAC address of the device value_template: “{{ is_state(‘device_tracker.richardUlefone’, ‘not_home’) }}” Actual mac...
View Article