Where are Insteon Device Overrides stored?
Another way looking at my insteon. I presume that my insteon device is on my PLM as it was working last time i had Indigo fired uo. I created the over ride , it says that it has success and the...
View ArticleCount items on the shopping list
Hi all, Hoping I am overlooking something here, but I’ve checked through the developer area, but can’t find anything. I wanting to know if there is a way to count the number of uncheck items on the...
View ArticleTemplate Cover not working. Need advice
I am needing help. I have a old garage door(dumb opener). I put a Ecolink tilt sensor on it so I can tell if it is open or closed. I then purchased a sonoff momentary relay to act as the wall push...
View ArticleChanging light color in Aqara M1 Hub
I integrated an aqara M1 hub into home assistant using homekit controller. It show in integrations as one device and four entities. My question is how do I change the color of the light with a state...
View ArticleSense Home Energy Monitor Integration with Solar Option
I am very new to Home Assistant, so I apologize for the “newbie” question in advance. I have HA running on a Raspberry Pi and have integrated many systems (I am a refugee from Insteon world). My Sense...
View ArticleNeed help triggering an automation when a timestamp is X days old
Hello all, I am trying to get a low-battery warning for my various Insteon Leak sensors, which talk to HA through MQTT. In addition to wet/dry, they each connect daily for a ‘heartbeat’. This shows up...
View ArticleSend MQTT payload from IoT Link to HA via Windows CMD
I’m using IoT Link to send HA status messages, ie. SessionUnlock, etc. The problem I’m running into is when I first boot into Windows, the VM hassio is installed on is not running yet, hence, HA is...
View ArticleZHA fails to setup
I’ve had intermittent issues with ZHA using a ConBee II stick but it was working fine until I just updated Core from 2022.4.6 to 2022.4.7 After a restart, none of my Zigbee devices were available....
View ArticleSamba 9.6 Upgrade Killed Samba
Just upgraded to Samba 9.6, unfortunately. Now it no longer works. Seeing this log file error: interpret_interface: Can't find address for wlp1s0 added interface lo ip=::1 bcast=...
View ArticleClik here to view.
Delay not working accurately
Hi, I made automation based on zone and tracker device, when tracker_device leave the zone, automation wait 20min and make check if tracker_device still out of the zone then turn off AC, The problem...
View ArticleClik here to view.
Energy skyrocketed after update
Hello, yesterday I updated from 2021.12.x to 2022.4.7. My energy dashboard has skyrocketed as shown below: You can see where the update happened For reference here is the day before that is “normal”:...
View ArticleCan I change a binary sensor to report as open/closed as opposed to on/off?
Rather than showing me OFF, I would like it to say CLOSED. Likewise ON, I want it to show OPEN. I could have sworn this ability was added a recent update but I cant find how to do it. 1 post - 1...
View ArticleTileboard - How to get started?
I installed Tileboard and can’t find the /www folder anywhere. All the documentation I can find says it’s under the config folder but it’s not there for me. Using HASS OS. 2 posts - 2 participants...
View ArticleStarting a Script Sequence With A For Loop
I have a script to control the LED bar on Inovelli switches, dimmers, and combo fan / light dimmers. At the moment I have to call it separately for each type of device (switches, dimmers, the fan...
View ArticleWhere to add user to the vboxuser group / USB passthrough /Ubuntu HA VM on Win10
I am following the instruction on how to get USB passthrough for my zwave stick from the win vm into HA. I keep seeing notes to add the user running virtual box to the vboxusers group. In windows...
View ArticleLocked out /cannot sign in with correct username and password (after...
This will be a long post. I installed HAOS into a VM on the official synology VM manager package on my synology DS218+. I could import my config from an older install and happily play with HA several...
View ArticleCreate button that will Run A/C at set temp and time
I was wondering if someone could help me create an automation that will turn my A/c on a specific temp and run for 3:30 hours @1am after i click a button in lovelace. then the button will reset to off...
View ArticleHow to add template for button-card?
Hi, I’m still new in HA. Recently, I wanna customise my HA dashboard, refer to some idea in the community. the below code I want to add to my dashboard, then I click 3 dots and select raw...
View ArticleZigbee Moes Smart Switches
Hello, I do apologize if this might have been asked. I have been trying to find answers for quite some time and did not find anything specific to my issue. I am fairly new to HA and have been enjoying...
View ArticleClik here to view.
How can I convert reed sensor impulses to cubic meters and kWh for my gasmeter?
I have a vzlogger instance running that posts my gas meters impulses to HA. I am somehow lost now how to convert these impulses to m3 and kwh and how to use the values also as utility meter for the...
View Article