Using HUSBZB-1 USB Z-Wave and ZigBee Adapter
@mrstanley wrote: I am new to Home Assistant and still learning. I setup the USB adapter and configured the Z-Wave portion of the stick but am confused on setting up the ZigBee section. I couldn’t...
View Article'Login attempt or request with invalid authentication from 127.0.0.1' with...
@SylvainGa wrote: So from time to time, when launching HA from my phone through the mobile app configured with Nabu Casa, I get a Login attempt or request with invalid authentication from 127.0.0.1...
View ArticleClik here to view.
MQTT Broker Configuration Help
@mchauhan wrote: Hi I am running HASSOS on two different RPI3B, one is my production env and other one is development. Dev server running latest version 108.2 while prod is running version 101.3. I...
View ArticleMQTT finds device but doesn't show
@whatisk wrote: I am looking at getting rid of my current Xiaomi Gateway and have setup Mosquito Broker and Zigbee2MQTT as per the instructions I have found (I have the board configured). And they...
View ArticleHelp with automation and trigger
@msahar wrote: I want to listen jingle bells at 9 AM every Friday, Saturday, and Sunday. Below are the code spinets from configuration and automation files. I am not able to achieve this despite...
View ArticleZ-Wave almost entirely stopped working
@sanmane wrote: Hi! My Z-Wave network seems to be broken somehow. It has been running flawlessly for the past few months. I’m not sure what as gone wrong, and I don’t want to make things worse. My...
View ArticleHistory Graph Card plots a staircase for sensor and a spline for input_number
@GrahamS wrote: Now at HA 0.108.3 As discussed here, sensor values are plotted as a staircase of values. I converted some sensors to input_number to retain their values after HA restart. I was...
View ArticleCondition for one temperature being lower than another?
@Faramir wrote: I am a little stuck on how to create triggers and conditions for an automation I’d like that is depending on temperatures of two sensors. In pseudo-code I’d like the automation to be...
View ArticleStrange behavior in button card
@cinquemic wrote: Hi all, I have a problem with a button card I’m running on hassio 0.108.1. When I set assumed_state: false in customize, the button switch to on and then to off, if I re-press the...
View ArticleGroup still shows ‘order’
@Mariusthvdb wrote: Checking my groups I now notice all groups still show ‘order’ in the developer-tools/states Sorry for the tag, but please let me ask @frenck, is this still used and undocumented,...
View ArticleOwl CM180 rfxtrx433e
@Markg wrote: Hello, I have an owl cm180 energy monitor that I’ve setup with a rfxtrx433e. Every now and then I get a Total usage stat of 0 which is throwing off my calculations for cost for the...
View ArticleZwave entities unavailable after customize change
@dvbit wrote: I have the following issue: I cannot customize any feature of zwave entities. If I just change even just an icon although they are still listed under the controller I cannot do anything...
View ArticleUnderstanding state_topic
@sean.mcgrath wrote: Hi all, I would like to get state_topic working on my switch, and would love some feedback. I have an MQTT switch that sends messages to my ESP32 Arduino board to turn irrigation...
View ArticleClik here to view.
Integrating Mi-Light 5 in 1 LED Controller with Home Assistant
@ryan.mccartney wrote: Hi, Has anyone had any success trying to integrate a Mi-Light 5 in 1 LED controller with Home Assistant? They use the closed 2.4GHz RF communications to work with remotes and...
View Article2 minute stream delay
@AlphaSupreme wrote: I started using the stream component this morning. The camera’s seem to work, but if I look at the live view of the camera, it has a 1 minute and 52 second delay. Tried multiple...
View ArticleGetting a template sensor to work
@rch1708 wrote: Hello Experts, To begin, I’m new to HA - attempting to move over from OpenHAB. In my current config, I have a ‘switch’ entity that has a (power consumption) value associated with it. I...
View ArticleAutomation based on the value of a sensor in a given time
@Denny_d wrote: Hi everyone, these days I have been working on automating cooling fans based on the CPU temperature of the RPI4. I created this automation which based on a certain temperature that I...
View ArticleClik here to view.
Systemmonitor: Error on device update!
@Boogs77 wrote: Hi to all! I got this error several weeks ago, but I’m not able to solve it. image858×534 41.6 KB systemmonitor: Error on device update! Traceback (most recent call last): File...
View ArticleMQTT, probaly asked 1000 times
@PeetsHome wrote: Hello all, iám rather new on HA and having some questions about MQTT sensor readings / formatting In the template editor it works ok {{ states(‘sensor.DB199_OB098’) | round(0) }} {{...
View ArticleClik here to view.
WLED unavaiable - 0.108.3 HA issue
@BullFrog wrote: Updated HA from 107.6 to 108.3 around 11:10~ WLED integration started to act strange, Unavailable -> ON -> Unavailable -> ON. Even when when I turned OFF it became...
View Article