Clik here to view.
Multistate light
@adamkrol wrote: Hi I am new proud user of home assistant in my home. My installation is based on mysensors which exposes all “relays” to HA. The problem I have is how to show and manipulate with...
View ArticleMQTT Problems with 0.101 release
@maurizio53 wrote: I am having serious problems with mqtt component when upgrading to 0.101.3 from 0.100.3. Is this configuration correct related to the breaking changes listed in the 0.101 release?...
View ArticleUse KNX switch to control media_player volume
@Wouter1 wrote: I have been experimenting with controlling my media_player volume through a KNX switch. The approach I used was to use a dimming object in KNX. The volume adjustment catches the on/off...
View ArticleRename an entity
@Makis wrote: I have some covers for example with the following name cover.50758014840d8e918614 I have use them in several automations. If I rename the entity through fronted will the still valid in...
View ArticleTemplate for sensor with too many digits
@Klagio wrote: Hi I have a power sensor (Shelly EM) that gives power with 6 digits 567.123456 W Wish to have no digits. How to create a new sensor, sorry very bad at templating. ALso is it possible to...
View ArticleTemplate in Action
@hub4code wrote: I try to use a template value in a automation (action), but I do something wrong?? Action is: entity_id: media_player.kodi media_content_id: | "{{ state_attr('media_player.kodi',...
View ArticleComparing char received from a shell_command in a light_template value_template
@ky56 wrote: Hi, I have just started using Home Assistant and I have a custom controller that I would like to add. The following configuration works perfectly: switch: platform: command_line switches:...
View ArticleVery basic input select with thermostat states
@lkeays wrote: Hi, I’ve tried many things so far and I can’t get to do this: Input select -Home -Away -Reset # in configuration.yaml input_select: thermostat_mode: name: Thermostat Mode options: -...
View ArticleRun out of USB Ports?
@jriker1 wrote: I am curious. I was planning out something and didn’t know how to deal with lack of USB ports: Want a USB Zigbee stick Want a USB Z-Wave Plus stick Want a USB modem for Caller ID If I...
View ArticleClik here to view.
Program name in syslog
@renwickr wrote: Hi all, I am currently sending messages via syslog to be parsed remotely and the “program name” is always “Home Assistant” which is ok for us Humans but the remote parser really hates...
View ArticleCan’t set Heat for RCS TBZ48 tstat
@KHA wrote: Hi all, I’ve looked through here and reddit and can’t find a solution to my issue. I have 2 RCS TBZ48 thermostats and I can’t set the Heat for either. This morning I removed the batteries...
View ArticleOpen the cover if someone opens the window
@Dreamoffice wrote: Hi i would like to open the cover to value “10” if it is closed. but i can not find where the problem is. who can tell me my mistake? - id: rolladen_esszimmer_auf alias: rollladen...
View ArticleDashboard Scheduled Display
@spurgelaurels wrote: Currently using Lovelace on an iPad with a few tabs to display relevant information. But I’d rather not have to interact with the tablet, and most of the information is...
View ArticleClik here to view.
Aqara Motion Sensor Hack for 5 sec
@adrez99 wrote: I’ve got an Aqara Motion Sensor paired with ZHA and I’ve modded it to send motion every 5 seconds instead of 2 minutes with this guide: SmartThings Community – 19 Oct 18 Making Xiaomi...
View ArticleTemplate from Wh to KWh
@Klagio wrote: Hi I have this REST data “emeters”:[{“power”:811.25,“reactive”:-507.50,“voltage”:227.16,“is_valid”:true,“total”:2264.8,“total_returned”:0.0}, using this REST sensor I able to get the...
View ArticleHelp with project for Firewood Calculation
@argykaraz wrote: I am trying to figure out how to do this project, but I am having trouble. I tried some things, but the final result was not what I wanted. If you guys help me out with this, I will...
View ArticleData template in timer duration
@tortfeaser wrote: Hi there, I’m trying to create an automation for my salt water pool chlorine generator. The time the chlorinator must be active and therefore generating chlorine is dependant on the...
View ArticleClik here to view.
Problem with conditional card
@HorizonKane wrote: Hi all, long time no see Had a lot of other stuff to do and not thaaat much time for my HA. However I am creating some new stuff right now and I am facing a problem with a...
View ArticleClik here to view.
Help with mapping values from Input_select
@lkeays wrote: Hi, I’ve been trying to map my input_select to an automation but I failed after long hours to figure out how to write the mapping code. I need to feed this from my input select. data:...
View ArticleHow to debug [homeassistant.components.websocket_api.http.connection] errors
@flyingpenguin wrote: I keep getting these [homeassistant.components.websocket_api.http.connection] errors at the rate of about 100 per day: 2019-11-12 21:16:55 ERROR (MainThread)...
View Article