Philips Hue - Uncontrolled Turn On State
Hi, I made a test automation to make my Hue downlight turn on with a chosen colour and brightness, but the colour setting doesn’t seem to work. When the following snippet is included in the config...
View ArticleClik here to view.
MQTT IRsend not working
Hi, just starting to setup my esp8266 tasmota ir remote. I can get irreceive working, getting all the signals when I press the buttons on my remote But I can’t seem to get irsend working, I’ve tried...
View ArticleWait_for_trigger with LG Heatpump not working
Hi @all, i have follwing issue and i dont the reason why my automation hangs I have a LG Heatpump connect by ThinQ. In SuperVisor i see all data i need. So i wanted to make an automatoin doing...
View ArticleClik here to view.
HC-SR501 Sensor
Hello, I am currently integrating a HC-SR501 sensor (motion detector) into HA using the GPIO PINs of the PI. I connected the sensors to GPIO pins 9, 10 and 11. The sensors also switch without...
View ArticleTuya Thermostate On/Off Switch missing - Custom Switch Q
Hi @all, i use Thermostates which connected with TUYA Issue i have is that this kind of Thermostates only have 4 Value i can use Heat/Cool (=Power On) Off Temperature Room Set Temperature Is their a...
View ArticleZigbee2Mqtt problems
Since I have installed the latest version of HA, the Zigbee2MQTT devices do not work for me. When I want to reinitialize the ZIGBEE2MQTT it doesn’t let me. Does anyone have any clue how to fix it?...
View ArticleClik here to view.
Another "Energy Dashboard showing no data" post
I have tried working with the energy dashboard multiple times. I thought I had this time, but after leaving the new sensors on the dashboard overnight there is still no data. I have three sensors...
View ArticleCurtain automation Zigbee
Hello, I have some QS-Zigbee-C01 blind automation devices. When I configure them I am not able to calibrate them correctly since the first time they work well but then they lose their position and for...
View ArticleClik here to view.
Google Assistant Keeps losing connection with Home Assistant
Hello there. Im using Home assistant for a long time now. I have setup Google Assistant manually using a test app like described. Sadly a month or 2 ago the google assistant gets problems...
View ArticleClik here to view.
Energy Dashboard - impossible to add entity
Hey Colleagues, i try now for days to add an entity to my energy dasboard without success and i kindly ask for help. What i want to do? I created a ai-on-the-edge device to capture my gas consumption....
View ArticleAny walkthroughs to get a SHT40 and D1 mini to connect with ESPHome?
I found some videos and tutorials but they only go over a few key parts or just a portion of the setup. I’m an idiot so trying to piece together tutorials from several different sources isn’t working....
View ArticleClik here to view.
Shelly 2.5 as pulse relay to switch existing dimmer
I have a dimmer (Jung 1731DD) which is mainly operated manually, but I would like to switch this dimmer on in case I’m not at home. This dimmer can be switched on/off using a pulse signal (relay on...
View ArticleProblem with wall switch connected to relay controller
Hello guys i need help with a problem. I have 1 relay controller and 1 logical controller connected with HA by mqtt. relay controller is: home automation local server – KC868-Server - Smart Home...
View ArticleWeekday Condition Challenge
I finally got the routine to work to gradually increase the lamps in the bedroom starting at 6:15AM, but I’d like to avoid waking up at that time during the weekend. Where did I go wrong when I added...
View ArticleClik here to view.
Where to find the content of the configuration file
Hi, I am new to HA and struggle to understand where configuration data is stored. I get the impression that the development of HA is moving so fast that information in documentation and forums rapidly...
View ArticleLengthen Logbook History
I’m running home assistant supervised on a Raspberry pi that’s booted off of a 1 TB SSD that only has 3% of the disk space used… So in this case how can I increase How long the log book keeps the...
View ArticleUsing Z-wave JS UI add-on but Z-wave JS add-on keeps coming back
I was directed to a thread from last year that talks about this but it’s not working for me. I did apparently select the check box to use the Z-wave JS Supervisor add-on and the thread says to add a...
View ArticleClik here to view.
Template sensor not showing up in area card
Can’t get my temperature from my Mill heater in the area card. From my climate I’ve created a template sensor and sat it to the correct area… but It will not show up. 1 post - 1 participant Read full...
View ArticleClik here to view.
Recurring configuration.yaml error
I’m running on a Synology DS920+ VM w/ 2GB memory. Any ideas on how I can remove this recurring error, please? It just keeps showing up no matter what I do… It says to check line 11, but when I look...
View ArticleClik here to view.
Passing string variables to Notify with line feed and carriage returns
Hi I’m fairly new to Node Red, pretty new to Home Assistant and completely new to Javascript, so please forgive and have patience if my code is kinder garden grade! I’m trying to build a notification...
View Article