UFO-R11 - Universal smart IR remote control - handling learned codes
Hello, I’ve got the IR remote with the purpose of steering it via MQTT. The issue is that all of the learned codes are concatenated in a long string without obvious separators. Example...
View ArticleAutomation conditions using value template based on event trigger entity_id
I have a value template condition within the alarm system automation which was previously working fine. I recently noticed the following error in the log file: Error in 'choose[2]' evaluation: In 'or'...
View ArticleSwitch off a device via the device_tracker after an adjustable time
I would like to use the device_tracker to track the online time of my children and to block their assigned devices from the internet via a Fritzbox script if the online time is too long. Currently I...
View ArticleShelly 1‘s are loosing connection after restart
I am running Homeassistant on a Rasperry Pi 4 and as long as it is running, everything is great. However when the Pi looses power and I am restarting it, it shows my Shelly 1‘s with latest original...
View ArticleCustom Button Card - Thermostat Picture with dynamic temperature
Hi there Looking to setup a Custom-Button using a picture of a thermostat with the temperature for that room in the middle (using the entity / sensor) Any directions on how best to achieve this? Will...
View ArticleIntegrare Dvr e-vision
Hi, I have tried different ways to integrate my e-vision dvr with home assistant without success. The DVR in question is a DVR104LA, analogue with 3 cameras connected. I can access it with special...
View ArticleTracking iPhone with BLE beacon
Is it possible to track iPhones as BLE beacons? I enabled the iBeacon integration and it sees my Tesla car, but it doesn’t see any other devices. I’m interested in doing this for privacy - rather than...
View ArticleClik here to view.
Can I configure Z-wave JS serial port by ID?
Below is a picture of my zigbee 2 mqtt setup, can I do the same thing in Z wave JS? 1 post - 1 participant Read full topic
View ArticleClik here to view.
MQTT Help for sensor
Hi all, Created a simple python script to get TV Guide for me and store it in MQTT like so: I’ve got a sensor in my config like so: mqtt: sensor: - name: "Full TV Guide" state_topic:...
View ArticleClik here to view.
Can’t get ps4 integration working
So I’m following the home assistant guide to try and get my ps4 into home assistant, this one Sony PlayStation 4 - Home Assistant So I have the second screen app on my iPhone and I can control the ps4...
View ArticleClik here to view.
Changing ESPHome name and installing update config wirelessly?
If I try to change the name of my device thats currently called “bed4” to “bed-pressure”, then when I try install and update wirelessly, it tries to connect (and fail) to bed-pressure.local Is there...
View ArticleNetdata: defining scan_interval
Is it possible to define scan_interval for Netdata? Docs have no info for a possibility to use scan_interval for this integration. Actually, I am rather satisfied with a default frequency (1 minute,...
View ArticleSystem restarts with "old" version, plus cant update core
I have been fighting this for a couple months. I have a dedicated NUC, running 2022.12.4. It is not a complex build, only have a few addons, automations, and config file adds. Nothing cutting edge. I...
View ArticleXiaomi Gateway 3 stopped supporting the Zigbee devices after the latest HASS...
Hi All, I am using Xiaomi gateway 3 via custom Integration (GitHub - AlexxIT/XiaomiGateway3: Control Zigbee, BLE and Mesh devices from Home Assistant with Xiaomi Gateway 3 on original firmware) and...
View ArticleHow to turn off in Automation with an Switch
Hello, I’m very new to the HA Universe and trying my best to get this stuff working. I’ve got a problem, I assume the solution is very easy, but I can’t find it out. My hallway lights turn on with a...
View ArticleTrying to figure out sensor templates for smarter motion trigger notifications
Hi, I would appreciate some feedback/help. I am trying to smarten up my security automations/notifications by reducing false positives. I have a number of motion detectors outside, and everything...
View ArticleHow to write a "For: " entry with an !input parameter in a blueprint=?
input: door_or_window_open_recognition_time: name: Door or window open recognition time description: The time for which a door or window can be open before the heating switches off selector: time:...
View ArticleHow to access a helper as an input in a blueprint template?
You cannot put an !input parameter inside a template in a blueprint definition. I read elsewhere that the trick is to assign the input to a local variable and then use the local variable in the...
View ArticleMy Z-wave just stopped working after updating
I applied recent z-wave JS UI update to 1.6.0 and now I can no longer access the UI. I attempted ro roll back using restore from backup, and now z-wave JS has an error Retrying setup: Failed to...
View ArticleHowTo: Save statistics for some entities for a longer Tim
Hi there! I am using HomeAssistant for over a year now. It is my platform to connect my KNX installation, my Hue lamps, SONOS, iOS and my heat pump. Especially for my heatpump I want so save some...
View Article